Impeller Replacement - Sherwood Pump
Loading...
Loading...
3,911
Loading...
Uploader Comments (boatinghowto)
see all
All Comments (5)
-
@5191keith Keith the process you describe does work well and I have used it a few times when I have ran across one that tended to be difficult. Thanks for bringing it up!
tim
-
I don't use it, but here is a little trick. Put a zip tie around impeller (towards the outer end) turning the vanes in the right direction then put the impeller in and cut the zip tie.
I have a Sherwood pump (think its a G903) I want to know how can I tell the right direction to put in the seals. I can't find a diagram. Can you email me at mstuart1@aol.com ? 562-618-3778 cell
Loading...
5:00
How to replace water pump impeller on 1999 Yamaha 50 HP Outoardby Danbury21044,287 views- 5:12
Cummins 450hp Engine Overheats - Impeller Shaft Breaksby MustadMarine9,690 views
- 0:53
Chain Splice | How to Tie a Chain Spliceby AnimatedKnots10,224 views
- 1:41
Tom Sand water pump 2008-05-03 MOV02540.MPGby craigsmith248770 views
- 1:36
Jabsco FIP Pumps - Impeller Replacementby JabscoFIP7,323 views
- 1:06
Bay Shore Marine's Impeller Puller'sby Bayshoremarine1,522 views
- 6:23
Basic Anchoring Procedures, Setting Your Anchorby boatinghowto2,002 views
- 0:48
HONDA S800 Summer of 2011 at Tsukuba Circuitby spreadrick1,416 views
- 5:52
Installing an Onboard Washdown Systemby boatinglocal4,003 views
- 2:17
Marine Power 5.7L Seawater Pump and Impeller Changeby flmetfan2,322 views
- 2:12
Twin Chrysler 318 Marine Engines @ Neptune Marineby Hoots36224,227 views
- 0:32
PCM Easy Maintenanceby BoatsPlus4,604 views
- 5:48
Volvo Penta OceanX 2010 Components and Detail - By BoatTest.comby BoatTESTdotCOM5,071 views
- 9:26
How to install a water pump impeller.dvby pennnamebooks56,947 views
- 5:18
5.7L Marine Power SportPac MPI INBOARD Engine Package with 71C Transmissionby michiganmotorz20086,059 views
- 6:20
Outboard Motor Water Pump Impeller Replacement Guideby marineenginecom49,474 views
- 4:43
Volvo Penta 5.7 Gi - GXi (300 hp-320 hp) V8 Boat Engine Detail Reviews - By BoatTest.comby BoatTESTdotCOM13,105 views
- 3:01
IMPELLER D 400by bristotbreton6,205 views
- 1:59
FLUSHING VOLVO STERNDRIVE THE EASY WAYby flushthis10,556 views
- 9:25
Replace Sea Pump Impeller on an Alpha - Part 2by liboatersclub30,919 views
The zip tie trick works pretty good if you are having problems getting it to go in there. I have used it before and forgot about that. Thanks for pointing it out.
I looked for a diagram and couldn't find one either, but if the pump is still on the boat, remove the coil wire so the engine won't start and crank it over. If you can't see which direction the pump is rotating hopefully you can at least see one of the belts on the engine and from that you can figure out which way it rotates.
boatinghowto 5 months ago