BMW X5 - CD Changer Removal and DSP Installation
Uploader Comments (bavsound)
All Comments (16)
-
can you tell me on the db25 plug (the 25 pin) witch is the i-bus wire? is it 6 or 22 ? (pin) thanks,
-
so now,is this the way to do it? ,because normally the mid should turn on ,to the turner,and then from what i read on the forum ,sound should work!?
any clue how to do this to make it work?
thanks!!!
-
BMW X5 full system satnav question
Hi, Recently brought a full satnav system, started to fit into car.
Wired up DSP amp, but cannot find where to attach other end - Black block with 8 wires coming out of it. which are as follows
Yellow, Brown, Blue, Brown, Blue/White, Blue/Brown, Blue/Brown, Blue/Red
Giz' a clue?
Cheers, Andy
-
Thanks dude, I needed that!
-
Hey, I got an 06 X5 with DSP and I just got my CD changer but I just see de 3 and 6 pin conector. do I have to create a DSP conection or just plug the 3 pin ? what should I do ?
-
after plugging in the 3 pin conector and the 6 pin conector do I have to do some thing elase or thas all the connection that it needs ?
i have a 2001 bmw x5 with cassette and dsp,and i purchased a dynavin gps unit for it.
i did relocate the mid in the dash,and the cassette in the trunk in top of the AMP ,now,is there a way to get sound?,because right now i dont have any sound,i found on some forums a guide how to work around to make it work,but still ,,no sound"!,i conected my self with 5 wires,3 wires comes from the big plug from the amp,1 wire the white/yellow spots (ibus?) ,and the nr.5 pin on the db25 ,,all to radio plug
nemtulea35 3 months ago
@nemtulea35 Not sure 100% what your question is but want to give you a hand. Please email me through our website contact form on bavsound.com and I will be happy to help!
bavsound 3 months ago
that's it!
bavsound 1 year ago
Should not be an issue... Make sure that the CD Changer from the 2001 model has both the 3 and 6 pin connectors on the back of it. If so, you're good to go.
bavsound 1 year ago
Hi, By any chance do you know if a cd changer that belongs to an X5 2001 will work in anX5 2006?
HERNANDOBAR 1 year ago
@HERNANDOBAR - Should not be an issue... Make sure that the CD Changer from the 2001 model has both the 3 and 6 pin connectors on the back of it. If so, you're good to go.
bavsound 1 year ago