6 VOLTS DC IN 70 VOLTS AC OUT GENERATOR 5

Using 6 volts DC input I am able to get 70 volts AC output after a few changes with my basic setup. Thats described in my prior videos using the same Diameteric cylinder magnet.
Please note that an upscale of this setup is very safe as nothing can bust loose and fly into your face at super speeds
That safety point has to be considered when working with this type of setup. I already know how to get the magnet to spin faster but I wont risk doing it. Safety comes first.

I plan to purchase much larger magnets of the same type and keep working with a 6 volt DC low current input to see how much output AC voltage and current I can harvest. When I reach 300 AC volts safely and continuously I will stop at that point.

Then convert both input and output voltage and current to an ACCURATE power figure and compare results. If you are interested in my type of thinking then keep following my videos. I am following a single objective and that is overunity. Small power in. Large power out.

I have some very powefull block magnets listed on Ebay right now. If interested click 110509341781 on Ebay search.
Stay on this- i will show in my next video where I am harvesting 90 volts AC out of the same setup with a slight modification. I stll am not finished.

Category:

Science & Technology

Tags:

• ELECTRONICS
• MAGNETS
• ENERGY

[questboy86]

70 volts ac @ what amps

could you tell me

[64298]

@questboy86 I did that a long time ago and donty remember.

[subhankarwork]

- This is a nice Video - but ...

- If you want to get the Magnetic-Generator Plans

- Go to Google and search for "Best Magnetic Generator Review"

- Click the First result (Skip the Advertisements)

[64298]

@subhankarwork See my video SPLISH SPLASH then click the PHOTOBUCKET link I posted there. The schematic plans are posted to build the device there.

[mouayad888]

thanks for the reply, by the way, the generating part could be out side the motor, does that sound better?

[64298]

@mouayad888 You have work ahead of you. Build a small model and try it out. Magnets on the outside.

[drijfkip1]

Bedini rotor + Digital multimeter = Measuring errors.

a True-RMS meter is what you need to stop fooling yourself.

[mouayad888]

@64298 thanks for the reply, after i read your reply i went straight to my magnets and i put 2 of em on the stove for about ten mins and they still the same, so i really dont know how much heat needed for them to lose magnatisim, but will opposing magnets make electricity? i thought opposing magnets would make more magnetic flux or magnetic field around copper coils, is that true?

[64298]

@mouayad888

Nice idea if the magnets did not come in contact with hi engine heat. If they did all the magnet charge will dissapear.

[mouayad888]

please look at my diagram and tell me if its possible cause i dont know about electricity