Alert icon
We're changing our privacy policy. This stuff matters.  Learn more  Dismiss

Trailer Hitch Installation - 2006 Kia Sedona - etrailer.com

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
1,443
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Dec 4, 2009

http://www.etrailer.com/tv-Hitch-install-2006-Kia-Sodona.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Today on this 2006 Kia Sedona we will be installing Hidden Hitch part number 70761. This hitch installation will also apply to Draw-Tite hitch part number 75421. We are underneath the vehicle and the first thing we want to do over here on the passenger side frame rail is to go ahead and lower the exhaust down to get it out of our way. We are going to be removing the exhaust off of its rear most hanger which you can find right here and we can simply unbolt it from the frame there are two bolts there. 00:27

With the exhaust down we can see here that we have got three existing weld nuts at the bottom of the frame. Those are going to provide our attaching points for our trailer hitch. That is going be the same on both sides of the vehicle. In preparation we are going to go ahead and clean the weld nuts out first. Any vehicle that has seen at least one winter is going to have some road grime or corrosion built up inside those weld nuts. To do that we are just going to use a spray lubricant like a WD-40, and we just spray that inside the weld nut. 01:04

Then we just want to take a wire brush of some sorts. I am actually going to be using a battery terminal cleaner and just run that in there a few times. That will help loosen up the road grime and corrosion that is in there. You want to go ahead and repeat that process for all the weld nuts. With the weld nuts thoroughly cleaned out, we can go ahead and put the hitch up in position. We are going to be installing the hitch to the weld nuts using the 12 millimeter bolts and conical tooth washer combination. Now that we have got all the bolts up into place, we can go ahead and torque them down. You want to check with the directions to verify the appropriate torque rating for each individual bolt. With the bolts torqued down, we just want to make sure we put our exhaust back up on its hanger and our installation will be complete. This will conclude the installation of Hidden Hitch part number 70761 on a 2006 Kia Sedona

  • likes, 0 dislikes

Link to this comment:

Share to:
see all

All Comments (0)

Sign In or Sign Up now to post a comment!
Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more