How to loosen and lube your rubik's cube!
Loading...
Link to this comment:
Top Comments
All Comments (38)
-
Resident Evil BGM
-
i like the music... where can i get that
-
@rushyrulz hahaha right after i was done reading this i threw my rubiks cube on the ground about 10 times as hard as i could, works like a charm now!! thnx!
-
Spraying it inside like that only makes it chunky if you don't work it enough immediately afterwards.
There are solvents in most silicone lubes which will soften the plastic. You need to spread them around so they can evaporate quickly, and keep working the cube until they mostly harden so the pieces can't stick together.
Pulling it apart avoids that problem, but it also makes it more likely you're going to get it on the sides of the cubes, and end up with a slimy cube with loose stickers
-
Actually, opening up one side and spraying silicone into just that area will make your cube a chunky piece of shit. The real way to do it is to disassemble the whole thing, and spray all the pieces, including the core evenly with about 3-4 coats of silicone spray. Sanding it beforehand wouldn't kill you either. The main thing you can do to loosen it up is to just be aggressive with it. I've dropped mine a bunch and it's looser than a brand new one, so it must help =D
-
oh lol too late then because i already put vaseline on my cube lol
-
Credit to my buddy for teaching me how to do it.
Sorry, spelt Mixture to "Misture"
-
How to lube a Rubiks Cube:
1. Mix a few drops of WATER-BASED HAIR GEL & WATER together.
2. Destroy your Rubiks Cube. (Plug out ALL the parts and only leave the middle pieces and core.)
3. Put your Rubiks Cube Core in a small basin/container and pour the misture over it. (Don't worry, the stickers won't peel off)
4. Use a rag/toilet paper to wipe the middle peices.
5. Assemble the Rubiks Cube again.
This is a much easier (and safer) way to lube your Rubiks Cube.
-
If you read up on rubiks cubing most forums say that vaseline is a horrible alternative. It erodes the plastic and destroys the cube. DO NOT use vaseline on your cube! The only thing worse than vaseline is WD40! Also, I read in many sections that putting sand in your cube is a bad idea as well. Perhaps the problem is people are not putting exact amounts on their tutorials and first timers end up putting too much sand.... lol
-
what if i don't have silicone spray
3:31A V-Cube 5 Modby MeMyselfAndPi65,526 views
Featured Video- 2:16How to Make Your Rubik's Cube Run Fasterby stuff4psp29,550 views
- 1:39how to loosen a rubik's cubeby mrthatsintense27,652 views
- 9:143x3 Mod: MAKES YOUR CUBE WAY FASTER!by DeathCuberK78,773 views
- 7:11How to lubricate a Rubik's cube for speed solvingby robthecubehead75,735 views
- 6:36How To Lubricate A Rubik's Cube the Best Wayby camcuber123,855 views
- 1:02Modern Warfare Nuclear Bomb Streakby 06pudge0610,282 views
- 0:31Rubik's Cube Lube Reviewby cubingmadness9,876 views
- 2:02Why petroleum jelly is bad for your cubeby masterthecube34,923 views
- 5:33how to properly lubricate you cubeby lthummina25,924 views
- 2:28How To Make Your Rubiks Cube Faster/Smootherby jgotmoves277,869 views
- 2:14PS3 YLOD - Eject disc in ps3by 06pudge061,477 views
- 5:31How to loosen a DIY rubik's cube/ make a mimic ...by minix972,385 views
- 0:109 moves per secondby RubiksCubingFool4,479 views
- 2:38Cube disassembly.by matt4magic6,458 views
- 1:08How to lubricate a Rubik's cubeby JonnyDaLegend17,870 views
- 3:47Cubesmith Sticker Removal : How To Remove Rubik...by HowtoCube6,363 views
- 4:32How to lube and loosen a 3x3x3 rubik's cubeby TheCubr666 views
- 7:36How to lube your Rubik's Cubeby Mrstealalot8,835 views
- 2:445x5 Rubik's Cube - Solved in 2:37.43by ExoCorsair2,460 views
video is too bright, can you make it darker next time?
ghf4 3 years ago 23
Lmfao
shawszaa 3 years ago 7