Jan 2011 - SPY 5000M 2-Way Motorcycle Alarm (Msg me for help.. I answer all questions)

Just installed the SPY 5000M 2-Way Motorcycle Alarm System. Comes with Microwave/Proximity sensor - Shock sensor - Remote Start & Disarm - LED light - parking light notification connections and 2 FOBs (keychain remotes) WARNING!!! DO NOT KEEP YOUR REMOTE attached to your motorcycle key. The vibrations while riding is HARMFUL.

FAQs:

Yes, this alarm works. I am/was not paid to endorse this product. The proximity sensor is adjustable and haven't had any issues. The shock sensor is adjustable too. It can be overwhelming to install once you see the installation guide but if you attack one wire at a time, it's less intimidating. Red, to your battery. The black (short) labeled ground to your frame, the 2 yellows to your parking lights and you have a functioning alarm. Connect the LED, SHOCK SENSOR, PROXIMITY SENSOR, and SIREN and you're good to go.

Connecting the remote start/disarm should be done by a professional or through trial and error. Have back up fuses, a (cheap) multi-meter and follow the wires from your (start button) and (ignition -key switch) and you'll figure it out. Buy extra wire... about 4 - 5 feet of red and black wires incase you need to extend some of the attachments. Zip ties and electrical tape needed.

Feel free to ask any questions and I'll do my best to help out.

http://zmc.com.sg/ - for more info

Email: Kennethlow@zmc.com.sg - The General Manager that helped me.


Basically, you'll need...

Electric tape to wrap/hide the colored wires after you install everything. ( 1 or 2 rolls.) - Also when you connect extra wires together.

Wire splicers to cut the plastic shielding to expose the wires.

Wire connectors (optional)

Extra fuses (like the ones included) in case you accidentally blow a fuse installing the alarm.

Zip-ties to secure the wires together and/or to run them along your frame. (The zip ties worked awesome to secure the antennae

Alcohol wipes to clean areas of your bike where you are going to attach/install parts of the alarm.

Double sided tape. (about four 2 inch squares... these work good to hold the alarm parts to your plastic fairings.

Extra wires ( one small roll of red wire and small roll of black wire) I used this to extend the wires on the alarm. Depending on where you mount the individual parts of the alarm, some of the wire thats included isnt long enough. This will come in handy.

Be creative and keep in mind, you don't want anyone to see the alarm or the wires. (That's why I use electric ape to wrap the wires so it looks like its part of the bike's electrical wires.)

Good luck, hope that helps.

Category:

Howto & Style

Tags:

• SPY 500M Motorcycle Alarm
• Scorpio SR-I800
• Scorpio SR-I900
• Scorpio SR-I110
• Gorilla
• 2-Way Paging
• Two - way paging
• motorcycle

[MrMwil]

How to start ninja 650r 09 . The start wont work

[bishop6]

@MrMwil - I'll need more information from you before I can help you out.... Email me if you want.

[partyman255]

i wana fit this on my honda cb1000r thanks for the vid =) very good commentry, very clear, and i seen alarm spy5000 2 way on ebay . have you had any problems with it ? im really tempted to buy it.

[bishop6]

@partyman255 not sure if I answered you... I tried to inbox you. Did you get it?

[antospeedyr1]

i have one of them on my cbr 600rr,indecator lights are not connected how to connect them and also one of me fob display not working,is it possible to get replacement fob? cheers mate 

[bishop6]

@antospeedyr1 : did you get my response? I tried to message you.

[offroadbiker1971]

Can't find this model on the homepage

Is this an old model? Which is the update one?

Thanx in Advance.

[RHINOSEXY]

dos it come with a telt sensor

[yaunotyao]

HK = Hong Kong*

[yaunotyao]

hi, so there is a setting where its silent alarm right? so if ppl get too close or shook my bike, only the signal lights would go out without the sound going off?

cuz i live in HK, parking can be bit packed, people would hate me if everytime they walk close it goes off loud lol, a visual warning should suffice

[JOEKULURI]

HELLO I HAVE ONE LIKE THIS AND I HAVE TO MAKE IT ON SUZUKI GSXR1000 OF THE 2002,BUT I HAVE A PROBLEM WITH THE START ENGINE,BECOUSE THE SUZUKI TO START THE ENGINE YOU HAVE TO PULL THE CLUTCH LEVER AND THEN YOU CAN STARET NORMALI.SO MY SUZUKI IS A SHOWBIKE AND I LIKE TO MAKE IT START WITH THE REMOTE IF I CAN ,CAN YOU PLEASE TELL ME IF I CAN MAKE IT ON MY BIKE IF YES PLEASE SEND ME HOW ,THIS IS THE LAST THING AND I AM A BIT ERGENT HOPE TO HEAR FROM YOU SOON THANKYOU

[creamyfilling102]

so how much does something like that run ya?

[rgaufman]

I had this alarm around a year and a half now and I always keep the remote attached to the key, have done since day - I use it as a mini clock for my bike :) - not had any issues yet.

[sorryunlucky]

@aartpacman314

I wouldn't even recommend installing the fob start, what if you accidentally sit on the button or something and someone is messing with it?