Apply Thermal Paste & Reseat CPU Heatsink
Loading...
Top Comments
All Comments (11)
-
Man,you might be right,but if you use a good quality termal compound,and you spread it carefully,than press a bit the cooler,I think it's ok...Maybe I am wrong,and I excuse myself if so,but since I spread the t.c. ,and not just spread it by pressing the cooler,it's superok... never surpassed 55°C...Peace y'all!
-
@remusccr If you spread your compound you make air bubbles, which are no good for cooling.
-
Dude,get real!If you don't spread the thermal compund with a card or smth alike,you'll have biiiig chances to see the CPU overheating like hell...the thermal compound doesn't always spread correctly if you just press the heatsink on the CPU...I've been through that shit before...
2 months ago 3
-
I'm sorry dude but your machines are a joke....
You might know how to build the things, but they are wayyyy overpriced...
-
when you're tightening a cpu cooler you should ALWAYS tighten the screws in a diagonal fashion, slightly tightening each one until all of them are completely tight, to ensure that even pressure is being applied across the surface of the cpu and motherboard.
-
you should put the paste on, press the heatsink on it, then check if paste covers the heatspreader or chip. if not you apply some more paste put the heatsink on it and check again. only after everything is well covered you finaly apply the heatsink.
-
that heatsink! what do you feed it?!
seriously though, thx for the video. first one i found that also showed the sink being mounted
-
interesting. always wondered how to apply thermal paste
- 6:42
How to Install New Thermal Pasteby TheGeekDistrict46,758 views
- 0:16
Overheating Athlon 64 3000+by audiotranceable91,890 views
- 0:36
Scraping dust from an AMD heatsinkby tatsutime250,183 views
- 0:21
How not to apply thermal paste!by Braxton61947,911 views
- 1:02
How to Apply the Correct Amount Thermal Paste to your Xbox 360!by DJFORTYALLTHAT36,441 views
- 5:08
Sims 2 MEP ~ The Scientist - Coldplay [OPEN]by NatalieFirexx11,409 views
- 2:10
Installing a CPUby ChinquapinTech20,827 views
- 5:32
How to install CPU, heatsink and thermal pasteby UniquePcBuilder10,272 views
- 1:54
Smoking laptopby Oemtube188,112 views
- 13:37
Detailed how to Install the Cooler Master Hyper N520 Heat Sink and Fanby Jonedcc18,710 views
- 3:06
How To Install An Intel Core i3/i5/i7 CPU/Processorby iHackUrMac15,936 views
- 8:31
MY GAMING SETUP!by MattHDGamer1,904,998 views
- 2:02
Re: Things That Ruin Thanksgivingby LauraTickled1,364,491 views
- 2:41
Cooler Master 212 CPU Cooler installby burtrubber042417,312 views
- 1:57
How Do You Apply Thermal Pasteby DragonePowa4,054 views
- 1:34
How to spread thermal grease.by thermolabcool300,092 views
- 3:54
16 Core Processor: Upgrade from AMD Opteron 6100 Series to Upcoming "Interlagos"by AMDUnprocessed191,917 views
- 1:01
Beware of applying too much Thermal Paste!by XenomexTutorials25,306 views
- 5:23
How to apply Thermal compoundby 101PcTech36,303 views
Can we get a series showing how to build a computer? From parts assembly to bios to benchmarking (you have some vids on this. so maybe just reference them)
dodgers2213 1 year ago 13
Hmm, I prefer double semi-thin lines, but I guess a semi-fat line works too.
ablahblah54 1 year ago 5