Utilization of Radiant Energy 1901 Nikola Tesla,My test 3

We are on the second floor of the house and I will show you the discharge/charge circuit. The antenna goes in one side and the grounding wire goes down to an outside grounding rod I made out of a copper pipe, and I tied and taped the wire to the ground. The circuit consist of two LED diodes, two caps, and the input antenna and output ground. Its very basic but the way I arranged the circuit got me good results. The diodes are in reverse to each other allowing a positive voltage to go on the reverse voltage side to the capacitor, and the regular negative voltage to charge the other capacitor. I forgot to mention but I even reversed one of the electrolic caps though I dont believe it effects the circuit because it would probably charge the same if I put the capacitor in the normal direction.

A thing to note is that the normal negative voltage is less than the reversed positive voltage which is basically 2 times the negative voltage. This shows a possible difference between the negative particles and positive particles hitting the plate. This proves that there is more positive particles charging the circuit than negative.

so in the 4 days I have tested this new circuit, the equations are as followed for 2 insulated HVAC plates::

reverse(positive voltage)~ 1 V/a day
Feb 23-Feb 26,2008 VOLTAGE:0 V - 4.6 V
normal (negative voltage)~ .5 V/ a day
Feb 23-Feb 26,2008 VOLTAGE: 0 V - 1.73V

In the next video I will show the circuit schematic and test the electric energy stored in the capacitor.
IF YOU GOT ANY INFO PLEASE LEAVE IT AND HELP US ALL. IF YOU GET THESE RESULT IF NOT BETTER THAN YOUR GOING IN THE RIGHT DIRECTION.

Category:

Science & Technology

Tags:

• nikola
• tesla
• utilization
• of
• raidiant
• energy
• 1901
• electronics
• high
• cosmic
• ray
• particle
• alternative
• free

[ses4life]

charge the sheets with volts. about 5000 volts. Also, you'll need tesla coils and capacitors to convert the energy. If you do that you'll have a constant 5k amps... (i think its amps) at day time and 4k amps at night. Also, instead of using sheets, use a net, made of charged wire. This will improve the energy output of your machine when the radiation is pushed onto the earth

[boxa888]

soo charge the sheet and leave it at 5000 volts? that makes alot of sense, this probabaly would allow the cosmic rays to be captured huh?

[sirmikeydotcom]

The radiant energy absorbers, to me, are the only way to go. Tesla, Moray, Roy Meyers, and Linden, these men were definitely inspired. Just imagine putting all 4 devices together, what might happen. I'm going to print the illustrations, to try and comprehend the designs. Overunity website has schematics for the 555 timer circuit, where we can pulse the caps to utilize the energy to do work.

[boxa888]

yea i love 555 chips, a great piece of technology! so many things can be made with them, maybe i should post how to put the parts together sometime. thanks for checking out my site anyways! i really appreciate the support

[careygibbs]

@turgor58 ...you know to get that ground you can actually put down 4 - 3 M rods .... or 6 2 meter rods..the electricity and / or your equipment will not know the difference

[turgor58]

There is heaps of power out there, I know it.

It only takes some perseverance and a bucket of dole to get it right. I see no other way.

The most important thing is to get it in resonance with the earth so it starts bouncing.

[turgor58]

In general it's when you connect things parallel you gain current and in series you double the tension. Just like batteries.

But I'm gonna make the teslacoil first. Make some nice jolts!!!And get into the thinking mode of tesla. Got some good Serbian music too!!! Europe you know!!!!

Than I'm gonna buy shiney stainless steel plates, which I found very cheap. Wrap them in foil and cover my roof with it. Next thing is hiring a drillhammer and the tools for banging in a REAL good earthrod. 12mtrs!!!

[boxa888]

what about a few connected in series or parallel?? same thing?? i never tried it but technically you could connect the setups in series or parallel and get more current or voltage....

[turgor58]

@turgor58

I can't get the outfit to resonate whatever I try.

The only amount of voltage i get from the sky is a lousy 2,4 volts with no current. If i load a big cap, I can have a little bulb to glow for a second or three but that's all.

Now I gonna build myself a genuine tesla coil.

The torus and the secondary and prime coil is ready. I think I make a nice outfit with mahogany and the shit. I will place a vid when it's done. I have to experience what it's like to fire a device like that!!!!

[turgor58]

Check out kapanadze the russian guy. he has something made from earth differential energy.

[turgor58]

Hmm, 7.46 Herz. Isn't that quiet close to the Schumann resonance?! It's suppose to go up due to the earth cycle of the 25850 years.

[turgor58]

yeah, right, but I'm not in the capability to build a genuine tesla tower at full statue, not that I cannot but I haven't got the space nor will the communal office grant me to do so. This is the Netherlands you know!

But still there must be a way to scale it down just like antennas do. I would be VERY happy with just let's say 100watt power to start with.

What annoyes me is, you can't a proper schedule with data. like how many windings on a coil, awg size. diam. length. I NEED details!!!!!!!!!