Building a Leaded Stained Glass Window with No Days Quick Cure

When building a stained glass window with No Days Glaze using the Quick Cure Method of construction, a standard heat gun is used to heat set the glazing material. You build the window (adjusting the pattern for the width of No Days Glaze, if using the pre-formed glazing strips), solder the joints, remove the flux, heat set the window, and when it cools and sets, the stained glass window is ready for installation.

For more in depth information, watch:
-Introduction to No Days Glaze for Building a Stained Glass Window
-Ordering, Sizing and Securing No Days Glaze for Stained Glass
-No Days Glaze - Preventing Pattern Growth
-No Days Glaze Hobby Cure Method for Constructing Stained Glass
-How to use the No Days Angle Lead Cutters for Stained Glass Leading

Contents:
-Constructing a stained glass window with the Quick Cure Method using a standard heat gun
-Adjusting the stained glass pattern when using No Days Glaze pre-formed glazing strips
-No Days Glaze pre-glazed lead strips eliminate the need to adjust the pattern
-Using a heat gun to cure the No Days Glaze
-if you're new to using No Days Glaze, it's recommended to practice on a small sample piece with the heat gun and the heat as you go Hobby Cure Method.
-Cleaning the stained glass window

Category:

Howto & Style

Tags:

• No Days Glaze
• how to video
• tutorials
• tutorial
• stained glass

[StreuterTech]

No Days Glaze was developed to cut out the putty or cement part of building a leaded glass window. So, instead of soldering together your window and carefully turning it over to solder the other side, then putty or cement; you put the No Days Glaze in the lead or edge came before building (there is also pre-glazed lead and edge came). After heat setting the glaze, it strengthens the window and eliminates the need to putty/cement.

[Cypher791]

please stop saying no days glaze >_<

[StreuterTech]

@Cypher791 Sorry, but what else am I supposed to call it?!? ;)

[kfotoprm]

Please tell me, what does this product add to a conventionally made, "came lead" piece of work? I cant see the "point" of using this product, what is it?

[beadsbysonya]

lol