直徑75mm暴力鑽孔加工影片拍攝
Loading...
Loading...
14,391
Loading...
1:54
用車牙刀在cnc銑床銑牙lathe thread tool on cnc machine cutting threadby cncfab14,141 views- 1:03
上銀科技 滾珠螺桿 製程介紹by take92618,695 views
- 0:34
史上最遠的倒掛金鈎! 守門員嚇呆了....by iamdavidchan2011299,910 views
- 0:06
走入歷史的台北機廠~地下車床by 99modo2,034 views
- 8:20
滾光工具by gstctech8,795 views
- 0:33
攻牙by kevinsupercheng4,517 views
- 2:36
傳統銑床之六面體銑削第六面銑削加工by shong66564,264 views
- 1:41
電鑽高手（探究自然）by tjhuang8884,558 views
- 12:10
車銑複合機!!by a9020820031,968 views
- 0:42
50mm膛孔器加工by shong66568,945 views
- 14:56
車削+銑削+滾齒切削by kaiko5794,472 views
- 4:22
水刀原理by FlowAsia122,673 views
- 1:05
仿形、鑽孔機械by sawsmart1,746 views
- 0:29
模型製作進階教學-4-銅管鑽孔by thepmw17,128 views
- 6:35
永進機械股份有限公司by YeongChinMachinery7,367 views
- 0:20
銑床當車床用？！外徑車削篇Ⅱby shong66567,287 views
- 3:17
子彈製作.aviby da00oha9,907 views
- 1:05
鑽孔,攻牙主軸頭最新運用by hannkuen3,199 views
- 0:42
機械加工與CNC車床 - 職業訓練by tnvtc5,732 views
- 0:31
自製掃刀加工by shong66569,432 views
對此影片做出回應... 放太慢了
morizshieh 5 months ago
@p5tcl8
morizshieh 5 months ago
這刀子讓你這樣用沒發揮它的實力說,還退刀鐵屑就一直噴出來了還排屑做什麼
ader2030 6 months ago
如果要鑽穿, 這麼深, 銑不見得比較好
ashipo 11 months ago
用G81阿同學~快鑽沒人在退刀的
還有進給率太慢了~
快速鑽頭講求的就是速度~
聽聲音機器剛性還夠~別怕
p5tcl8 1 year ago
直接用铣的好像比較快~~~~~~~~
sky502112 1 year ago