1996 Mustang GT Burnout

bad ass burnout

Category:

Autos & Vehicles

Tags:

• burnout
• mustang
• donut
• 1996
• gt

[crazykurtis14]

if the mustang was driving in reverse

[bcs1016]

Yea if you have shitty tires LOL the screen name says is all.

[lawdawg14]

@NWpowerhouse85 both are completely stock...the fox body's are slow! i mean c-mon, the non-pi 4.6 is poop lol and i'm consistently faster.

[NWpowerhouse85]

@lawdawg1400 If they're both completely stock, then you're full of shit, the 96-98 Mustang GT automatics had one of the sorriest valvebodies ever put in a performance car, their 0-60 time is about 7 seconds, and an E7-headed Fox body with a 5-speed was capable of doing it in just over 6 seconds.

[NWpowerhouse85]

@sonofthewolf2 No 4.6 has ever been rated at 281 horsepower, they're 281 cubic inches. Non-pi 4.6 motors in the CV/GM, T-Bird/Cougar, f150 and Mustang were between 175 horsepower(natural gas) to 225 horsepower(98 GT), the PI 4.6 was from 225 horsepower(CV/GM) to 270 hp(Bullitt GT). The 3valve 4.6 goes from 290 hp in the FSeries to 315 horse in the 10' GT. Finally, all of the early 4valve 4.6s ranged from 260hp(Continental) to 305hp(96-98 Cobra) and went up from there.

[NWpowerhouse85]

@NathanEG217 the 2011 isn't a 4.94L like the 302 was, but rather an ACTUAL 5.0L.

[NathanEG217]

Ok let me put my 2 cents in out the engine. In 1996 ford replaced its 5.0L (which is actually a 4.9) 302 v8 pushrod with a 4.6L 281 90 degree modular engine. It origanally put out only 215hp but was later beefed up to 225 then in 1999 it was made stronger again by adding different heads from the previous years it was now putting out 260hp and it stayed that way till 2005. it was yhen made even stroger putting out 300hp untill 2011 when the 5.0 (4.9) was brought back putting out over 400hp.

[honesty401]

@MR2Racer89 The 98 4.6 stang has 225hp also

[MR2Racer89]

i misunderstood what foxbodyboy2092 was sayin he was sayin the 99 and up 4.6GT v8's are 260 hp but the 96 97 98 mustang 4.6 is 212 hp and all of years 4.6 is 281 cubic

[MR2Racer89]

281 cubic not hp lol but yep its 281 cubic :)

[sonofthewolf2]

@MR2Racer89 you're right and i can back you up on that ive got all of my 4.6 shop manuals and if you look up the vin number on fords production lines it will show you its 281 hp off the line. mines a 97 gt straight from dearborn michigan :)