Warmoth Strat Build (part 10)
Loading...
Loading...
13,136
Loading...
Uploaded by smbstressfest on Feb 7, 2010
I NO LONGER WORK FOR THE MUSICIAN'S DEN, I NOW RESIDE AT THE GUITAR LAB, YOU CAN CONTACT ME EITHER HERE ON YOUTUBE OR BY SENDING A MESSAGE TO JASON@THEGUITARLAB.COM
Jason from The Musician's Den in Evansville, IN demonstrates building a stratocaster style parts guitar from a Warmoth neck and body. In part 10, the neck is mounted to the neck jig body block and we remove the finish from the fret tops so that we can get an accurate reading with a straight edge.
- 28 likes, 1 dislikes
-
- 8:56
Warmoth Strat Build (part 11)by smbstressfest9,850 views
- 8:28
Warmoth Strat Build (part 9)by smbstressfest8,139 views
- 8:56
Warmoth Strat Build (part 12)by smbstressfest10,360 views
- 10:01
Warmoth Strat Build (part 13)by smbstressfest8,355 views
- 8:54
Half of a Les Paul refret (part 8)by smbstressfest6,755 views
- 9:55
Warmoth Strat Build (part 4)by smbstressfest12,118 views
- 7:35
refretting a Fender stratocaster PART 20 (fret polishing completed)by smbstressfest20,579 views
- 9:57
refretting a Fender stratocaster PART 3 (removing the old frets)by smbstressfest62,028 views
- 10:48
Warmoth Strat Build (part 30)by smbstressfest7,037 views
- 9:41
Warmoth Strat Build (part 16)by smbstressfest8,694 views
- 8:24
warmoth strat reviewby mungbean626,921 views
- 5:29
Mounting A Custom Warmoth Neck on a Deluxe Strat Part 2 of 3by hansegg0814,008 views
- 4:32
Mounting a Custom Warmoth Neck on a Deluxe Stratby hansegg089,732 views
- 6:25
Current guitars close up Warmothby dan323224,045 views
- 1:03
Neck Radius Router Jigby Vandebilt12,598 views
- 9:18
refretting a Fender stratocaster PART 13 (filing the new fret ends flush and beveling)by smbstressfest26,375 views
- 5:08
1: Defretting A Guitar (How To)by jawsykilla5,418 views
- 8:37
Custom Stratocaster Build From Scratchby fletch1232,724 views
- 1:02
One Piece Neck Build Part 1: Introductionby Bobo997711,225 views
- 9:04
Warmoth Thinline Tele Demonstrationby telekhal7,695 views
Is there any reason that since the frets are going to be leveled anyway, to scrape the off the finish on the tops of the frets?
NapoleanXV 23 hours ago
@NapoleanXV Good question; yes there is a reason I chose to remove the finish. I wanted to make sure that the thickness of the finish on the top of the frets didn't prevent me from getting a good level reading of the tops of the frets with the straight edge.
smbstressfest 22 hours ago
@smbstressfest So why not level the frets before the nut installation?
NapoleanXV 19 hours ago
@NapoleanXV Because I need a nut to get the guitar strung and the neck adjusted straight under actual playing conditions so that the string tension can be recreated using the neck jig once the strings come back off for the fret leveling.
smbstressfest 16 hours ago
Why are you putting the neck on that jig?
guitarsdave 1 month ago
@guitarsdave There are several reasons, I think I explained it in the series. Continue watching, and if it still doesn't make sense then send me another message and I'll go into some detail for you.
smbstressfest 1 month ago