Kapanadze Generator - Part 2 Spark Gap Fail

It just won't go to ground through the spark gap. If I bring the ground wire close to the positive side of the capacitor it will arc, but not on the negative side. The MOT do the same thing. HELP! Here is the basic schematic I'm trying to use:

http://img823.imageshack.us/img823/9862/kapagendevice.gif

This is basically a Tesla circuit up to the spark gap. If anyone has any ideas as to how to run this HV across the spark gap, through the coil to ground, please comment or message me...I promise that I will be nice :P

Category:

Science & Technology

Tags:

• Krapanadze!

[TheGuru2You]

I do not understand why you use 1 instead of 2 separate ground connections:

Tesla said the Sun and the Earth form a large capacitator and "our" earth is the negative pole. It is said that Tesla discovered that you can tap into this large earth-sun capacitator by pulsing two separate earth grounds with a coil that causes a displacement effect. Depending on how you connect your ground connections to the earth-sun capacitator you get different output results.

[MrAnguswangus]

@TheGuru2You I apologize for being confusing. I agree about 2 grounds (10m). This was basically a vid asking for help :) (as usual it was a stupid error...lol). I knew that I needed it to go to ground so that's what I asked without being more specific...oops. If you look at the very beginning of the vid you can see the other ground wire coming from the core. Also, the bolt coming through the board also goes through a copper pipe on the underside. Your questions show why I value your input.

[vidbid1]

Good luck on building your device. Also, check out the Deadly Kapagen schematic on YouTube at watch?v=F9rajNIndcE

[MrAnguswangus]

@vidbid1 Thanks vidbid1. I watched your vid the other day...good stuff. In one of kapanadze's earier vids (the one with the device in a plexiglass box) you can see a flyback transformer pattern in solder on the underside of one of the circuit boards in the box. This is the only way I can rationalize how he was able to start pulsing it with a 9v battery.

Interesting stuff. I'll pulse the nice white bolt (like Tesla's hairpin circuit) I have now through it tomorrow and make a new vid.

[Magneticitist]

i cant tell what wire exactly that is, the black one, but shouldnt you be using the HV wire to try to arc to a separate ground? it almost looks like you are trying to arc a ground to a ground or something.i need to look more at this tomorrow lol

[MrAnguswangus]

@Magneticitist I should be sparking it from the positive side of the cap like a Tesla style spark gap circuit...this way I get a good spark to ground...duh!...lol. I never considered that Naudin's schematic could be wrong...maybe it's not, who know's?...obviously not me...lol.

Here's a good vid series:

watch?v=UsS0BeVeIwM&playnext_f­rom=TL&videos=Y02paZsXZOg

[a576able]

блядь,чё ни одного видео на русском языке нет!

[HappyJackProduction1]

the KaPanzee

[heycolslaw]

The negative won't arc with the ground because they conduct the same pole. Induction conducts to a foreign pole it's energy is released there. Remember the microwave oven surrounds the conducter with energy & thats how you emplement this. Oherwise, you'll get nothing. Caution!!! Induction current will FRY you if you don't know what your doing, better beware!!

[Drdump1]

I saw u all doing and designing the "Spark Gap devices or component from the scrapt, why not try with a 12V 30 Amp any type or CAR "Automobile Spark Plug" .. ?? i saw there motifie this spark Plug by injection water on it for generation higher arc current n power (on hydrogen fuel cell producing method video)

[jondelaire]

Maybe where you are located on earth your ground is the same as the positive end of the capacitor. Maybe try an antenna instead of a ground. Lightning flows in two directions, first from the ground to sky, then sky to ground. Just a speculation, but maybe this circuit works with negative energies. Maybe find a ley line to ground into.

[EricSerenaKnutsonCov]

it may be that your flyback has a negative output hence no spark to ground , let me know if this helps