Oxyacetylene Cutting
Loading...
Link to this comment:
Top Comments
All Comments (40)
-
shittiest cutting I have ever seen. Way too much acet, give it half a turn and light. Add oxy until you have neutral. Press cutting lever and set to neutral again. Give the piece a quick preheat, then start at one corner and heat until it is just about to puddle. Press lever and move as fast as you can without out running the cut. the piece should only glow where the cut satrted. The cut should be clean and dross free, with minimum roughness on the cut. Also get a new teacher, he is a knob.
-
you don't need gloves for torch just recommended in classes his hands are retarded
-
teacher should be sacked... wtf.
-
hes doing it really slow. its supposed to be one quick clean pass. not going back and forth like that unless ur preheating the steel. but even then ur not cutting so.
-
Quick tip. Don't touch the metal after you brazzed it, it's still hot. I forgot, I guess my thumb sticks out like a sore thumb now.
-
PPE!!!
-
i rember when i had to get the teacher to help me get a neutral flame
-
dont start with sooooo much fuel lol and move slower and #1 rule get comfy if u stay all bound up u cant get 100% fluidity and smoothness to attain a perfect cut. but most importantly wear sleeves gloves full face shield
-
damn that is one clean shop my schools is so dirty
7:39HOW-TO: Oxy/acetylene: cutting torch initial setupby ibanezshredder198621,809 views
- 0:12Cutting torch demo 1by piercedfreak00024,898 views
- 7:26Welding: Oxygen Acetylene - Kevin Caronby kevincaron31,881 views
- 2:39Mig Welding Technique Taught by Old Timerby weldingtipsandtricks1,026,692 views
- 0:28cutting torchby sunnhid9,695 views
- 3:11Cutting 1/4 inch steel with a torchby badazzbrentIII16,055 views
- 7:25OxyAcetylene Weldingby ChuckE200930,191 views
- 6:47ATI Professional Welding Section 2B Cutting Pipeby AmericanGunsmith15,593 views
- 3:55Cylinder cuttingby alligatorsoupisgood5,466 views
- 3:29Cutting a Circle With Oxygen-Acetylene - Kevin ...by kevincaron5,095 views
- 3:04Oxy Acetylene Cutting Part 1by zwinkey15,847 views
- 4:41Metal Cutting: Using Oxygen-Acetylene - Kevin C...by kevincaron4,527 views
- 2:29Cutting torch explosionby boardman07787,585 views
- 0:52Fabrication: Oxyacetylene cuttingby CorusBCSATraining24,818 views
- 1:59Cutting a perfectly straight edge with an OA torchby jme271226,896 views
- 0:37Oxy acetylene cutting, 2 inch plate, Undergroundby SASBAY12,024 views
- 2:52HOW-TO: oxy/acetylene cutting torch demoby ibanezshredder198612,377 views
- 0:48Evolution "Raptor" Steel Cutting Sawby TrickTools23,231 views
- 4:43Quick Oxy-Acetylene Welding Introductionby jcorsaro97,344 views
Where your gloves..... reason why these classes are getting cut everywhere
hitcb 1 year ago 12
Gloves! Sleeves!
bassfrontier 1 year ago 8