CAT D9G vs Vucni Voz

Bata Benzz u akciji pentranja masine na vucni voz

Category:

Autos & Vehicles

Tags:

• CAT
• D9G
• vs
• Vucni
• Voz
• caterpillar
• buldozer

[slatix007]

nema on ni 25 tona. radim sa new holand bagerom 212 ima 23 t

[voodoowood]

@slatix007 ima care skoro 50t!

[voodoowood]

I tell him to do that, but he' s dont want to brake asphalt and damage the road.

[CAJObre]

@voodoowood koliko je tezak ovaj dozer ?

[voodoowood]

@CAJObre Jebem li ga... ovako bez pluga nebi trebalo da je teži od 35t, a plug znam da je težak 7.5t.

[radiozins]

obama was operating the dozer.

[shelterduck]

id rather put a hole in the asphalt then bend the fuck otta my trailer

[GlobalMiningMachines]

tut tut tut. what a way to load it. poor trailer. reflects inexperience, afraid of his shite and panic stations at the vital tip forward moment, and for the person who said hammer down once you hit the ramps, anyone who loads any piece of machinery throttle wide open shouldn't be loading equipment, full stop. also like to point out its far easier load it backwards, and safer for hauling, anything hits the blade when loaded blade first=big mess, the other way round it would deflect off drift arms

[pbunyon2002]

@Draglineoperator Haha and someone lets you operate their dozer? Either something is wrong with machines you have been operating or something is wrong with you. I have yet to let anything slide off and I really take my time. Looks like the guy in this vid got it done too, albeit too rough.

[pbunyon2002]

How about backing it up on the trailer so the weight of the ripper rocks it over much sooner.

[busajohnny]

Here is an idea... How about lowering the ripper which would put the nose down a little easier. But hey, the mechanic must need some work and replacing trailor axles is pretty easy isn't it. He is lucky that 9 didn't slide off the ramp. Those tracks sometimes don't pull at the same speed at low rpms. I one time saw a stunt like and it ended up with blowing out a couple of trailor tires. But what do they care. They probably don't own the 9 or the LowBoy... Gone are the tradesmen that care.

[MrDozer1967]

Долбоёб, а рыхло зачем?

[virtualreligion]

fucking idiots that dont know how to operate this shouldnt touch this beauitful D9

[binzaesusu]

tontu

[Draglineoperator]

what is it with these guys stoping while loading and unloading dozers??? it seams like every dozer iv stoped while loading or unloading ends up, slid off the ramps or on its side. i was tought once that tracks touches that trailer hammer down and dont stop untill you where you need to be on the trailer.

[whiteox11]

poor trailer

[SGS123336]

@hwoods01 I think your right.