Goofing around with a Multiplex "Parkmaster 3D"

Peeler Park, Nashville, TN. Goofing around with my Parkmaster 3D. Axi 2217/16 on 2S Lipo. I had a friend shoot the video. I am a bit camera shy but getting better the more I practice. See more about this plane at rcgroups, Aero104.

Category:

Science & Technology

Tags:

• Peeler Park
• Multiplex
• Parkmaster 3D
• 3D
• foamy
• EPP
• Elapor
• AXI
• JR9303
• 2.4

[aero104]

I used an iwata airbrush and "createx" t-shirt paints from Hobby Lobby craft store. I then lightly heated it with a heatgun on low to set the paint. It is very durable paint. You cannot scratch or flex it off, BUT tape removes it easily. Keep that in mind when designing a scheme. If you need to mask over an area already painted, use dry mask templates of mylar or cardboard.

[bigmoebbq]

What kind of paint did you use to paint the Parkmaster?

I am thinking about doing a night / Pretty plane.. This is my favorite plane to fly.

[aero104]

@bigmoebbq I used t-shirt paint "Createx" available at most craft stores like hobby lobby. It is very durable but will easily come off with tape. Also prep Elapor with light acetone wipedown. "Set" paint with heatgun on low heat.

[aero104]

It weighs 15.2oz with 700mah 2S battery or 16.0oz with 2150mah 2S. My setup data is listed in the Parkmaster thread on rcgroups. Look for my ID, "aero104".

[nex12go]

Great flying!!

[aero104]

Thanks!

[Soaronex]

Hi There, nice video! How mutch is your Parkmaster total weight?

[keiliekiller93]

Your Parkmaster has the best painting I've ever seen!

[aero104]

Glad to hear you are into 3D. Keep practicing and you'll get there. I'm still a beginner and learning something new every time I fly. Sometimes relearning what I forgot from the last flight! See you at Peeler.

[RCFLIGHTHELP]

Man , your so good.

You got me into 3D , I am doing well with my Su-26 ... I haven't been that close to the ground yet though.

You make rolling circles look easy.