Blade CP Flying Around
Uploader Comments (navihawk1)
All Comments (22)
-
THIS THING IS NOT FOR BEGINNERS, YOU WILL BE BREAKING BLADES WITH THE TRAINING GEAR ON IT! ITS 1 of the MOST DIFFICULT HELI's TO FLY,BUT YOU CAN TRY!
-
Blade CP/Pro afficianados put brushless tail motors on their heli's for better control and long motor life. (effectively forever)
-
At first .... with more stick time wind is not a problem.
-
is this thing hard to fly? because i have the fs one simulator and its like crazy hard to fly on that.
-
i would visit your local hobby shop if you try to fix it your self you might not fix it
-
make sure you dont have the main motor cable backward the reasons it shaking is becasue its turning the opposite way and thrusting the air up so it is forced down. reverse the wire and see if thats the problem. I did that once to.
-
kinda sorta, any winds over 6 mph are very tricky to fly in, especially if there are gusts
Defenetly get good on the sim then try the real thing. Make a 1 ft square box on the ground and practice spooling up and down, and rotating the heli in the box, whenu can controll it and move it around with no problem try hovering a few inches off the ground, also use training gear, They work really good. And u will crash, lots, so dont give up.
navihawk1 2 years ago
i need a bit of help i was flying it right out of the box it flew good but i crashed it and now the blades seem not to be in sync and it shakes bad when its at full speed
schwste 3 years ago
check the ball links to make sure none cracked. also u might need to adjust them by a turn or two. And ur main shaft is most problably bent. so ur going to need a new one.
navihawk1 3 years ago