Phase 3 Squall with RC Lander EDF
Loading...
Loading...
4,687
Link to this comment:
Share to:
Uploader Comments (WingsRC)
see all
All Comments (4)
-
very nice flying.. looks little bit touchy isn't it :)
-
Thanks for the info. I have he 4 cell version and am just running it stock at this point. It pulls a little under 30 amps in flight and a little over 30 staticly. I'm using a 2200 20C and using up about 1400 mAh in a little over 5 minutes.
Loading...
- 5:09EDF RC Jet Soulcry Part 2by RWJets2,836 views
- 3:13RC LANDER THUNDER BLADE (64mm Metal Fan)by skyhobbies1,576 views
- 8:11phase3 squall and parkzone stryker in balboa parkby islandoffroad2,126 views
- 0:58RC Lander edf motor testby DJC261113,992 views
- 1:07Phase3 Squall buildby sdmailman20091,630 views
- 2:08EDF Rc Lander 68 mm. 3S 2200ma.by yong197820081,366 views
- 1:03PHASE 3 Squall EDF 4sby Newitt891,357 views
- 2:14Squall Speed Runsby 400chevlc470 views
- 1:00Squall fan testby wakillen2,403 views
- 4:13Squall Vectored Thrustby superrocketmrmagic1,499 views
- 3:41Phase 3 Squall! Maiden Flightby deltringham1,345 views
- 2:54modified Phase 3 Squall! 3d flight with crash o...by p51mustangace3,810 views
- 8:59Phase 3 Squall - Parkzone Stryker with flycamon...by a12vynn902 views
- 4:29Phase 3 Squall 70MM EDF Maiden Flight!by RedDevilSquadron1,837 views
- 2:09RC Mig-15 EDF Build and Flyby 321RCHeli8,220 views
- 0:25RC Squall Marekby Rolandus74789 views
- 5:19Airsoft RC Airplane SHOOTING FULL AUTO Maiden F...by BRANDORC672,090 views
- 0:21Phase 3 Squall Crashby WingsRC2,258 views
- 4:33Eurofighter Typhoon RC Jet Big Scale EDF Maiden...by RWJets28,840 views
- 3:37Phase 3 - Squall! HP EDF (Vectored Option)by ripmaxltd185,814 views
what battery did you run, and how did you mount the EDF unit in there with no mounting tabs? Also, what esc and timing did you run? What thrust and efflux speed do you get from the fan? I'm very interested in ordering this unit for my squall if it runs on a 2350 mAh 40c 4s battery.
cruddneck 2 years ago
Rhino 2250 40C 4S Battery
Used hot glue on the EDF unit
HobbyWing 60A Opto ESC w/Low Timing
I don't have thrust/eflflux data.
WingsRC 2 years ago
How many amps is that setup pulling?
rpottsoh 2 years ago
Ran it up on a 3600 20C 4S Lipo and it is pulling about 60amps and 930 Watts freshly charged, ESC timing high. On a 4S 2250 40C 4S it was drawing about 50 amps with ESC timing low.
WingsRC 2 years ago