walkera 4#3Q camouflage

walkera 4#3Q was painted in the camouflage.

AGM-114 Hellfire:TAMIYA 1/72 scale model parts
MIA moto-cooler
LED anti-collision light
Bell hiller head:4G3 Blade Controller
Because the flybar side is shorter than the bell side, this 4G3 mixing arm's stability is high and strong also in the wind.
From mobility to stability valuing.

Category:

Howto & Style

Tags:

• walkera
• 4#3Q
• 4-3Q
• RC
• mod
• bell
• hiller
• micro
• heli
• Cobra

[m43991]

That is one coll heli how much would it cost

[gadjetp]

It might be possible by about 65 dollar and your labor.

[gadjetp]

These are important things because it stabilizes the bell Hiller head of 4#3B and 4#3Q.

1.The head damper must not loosen.

2.Adjustment of ratio of flyber-weight and area of paddle.

3.The flyber must move lightly.

[FordManMT]

a buddy and me are looking to get some of these

how do they fly? what kinda flight time do you get? and can you bind these to a DX7 or DX6?

[gadjetp]

The stability of this airframe is very good.

The flying time is not measured.

The weight of the airframe is 46.3 grams. (no battery)

It flies with wk-2401 in the video.

I do not have DX7 though I have wk-2801.

[BDoggUSMC]

Do you have any tips online on how you did this?

[gadjetp]

No, it is only this video.

To stabilize the swash plate, coil spring is put below.

The silicone ring is put in the ball joint.

[forrest225]

Just a tip, make sure your tail rotor is soldered properly, mine came undone mid flight. Heli didn't look too good afterwards, I was in fast forward flight when it happened.

[CODBlackOPS2O1O]

where did you buy it? and in what city?

[xwilliampierre]

Mate, can you write up on how you done the mods and paint job?

[FlyingFighter]

Ok thanks guy. I fly co-axial for 2 years, and I fly mSR too, I'm a well skilled coax and mSR skilled pilot, and I have done more than 3 months of RC simulator with CP helis (using RealFlight G4, with T-rex 700, 600, 500 and Blade 400 and others). I hope at the end of 2010 I'll be able to fly great my future honeybee FP V2

[smialekpawel94]

Definitly.Even if you were flying co-axial for 7 months (like ma) it is very hard to fly.

[SilverBloodLine]

pretty cool but.......camouflage and BLUE blades?? plllleeeeeaaaasssseeeeee paint it camouflage, too :D

[FlyingFighter]

Is the 4#3 a easy to fly heli ? as the blade mSR or the Kestrel 500sx ?

[kelley51464]

Gaternation, the cobra by exceed is a walkera 4#3Q. It's the same with all the same parts. Just different branding. Like the buzzfly 4#3. so why is the Walkera better, when walkera made it for exceed?

[cabelyada]

this is different walkera body, i like the color, flashing light and the side weapon. is ther a walkera 4#3Q body like this in the market? i also like the exceed mini cobra-army color but with 100% walkera parts.

[shannonktm520sx]

Exceed is accepted as rebadged Walkera models, both of them are out of China, there isn't much wrong with that most as RC gear comes from there these days. You do get what you pay for, quite true, however if the distributors of these two birds sell the replacement parts at the same price and as the part number, it leads one to believe they are the same thing. Walkera is probably leveraging the Exceed name at a lower price point to get more sales.