Create Benny Benassi's-Bring The Noise (Pumpkin) Synth In Reason 4.0!

Go to http://www.djluckydate.com for more tutorials, songs, and refills!
Instructions for this video:

Take the "Yeah Yeah" synth and on the second oscelator change the semi from 4 to 7.
Next add a RV-7 Digital Reverb and choose the large hall setting set the dry/wet to 12
Create a Mclass Compressor and set the threshold all the way to the left, the ratio all the way to the right, the attack all the way to the left, and the release all the way to the right.
select the "soft knee" button

Instructions for "Yeah Yeah" Synth:

First create a Thor synthesizer
Set the polyphony to 4
And the release polyphony to 1
Now select mono retrig under keyboard modes
Select on for the portamento
Now click show programmer so we can actually get this synth rolling
In the first oscillator leave it as an analog and move the octave to 3
Now turn the little knob below tune and make sure its a t OSC 1 PW 64
On Oscillator 2 add another Analog Oscillator, the octave should be set at 4 and the semi should be set at 4
Set the tune knob to 11
Once again turn the knob under tune and set it to OSC 2 PW 64
Now add a third Analog oscillator.
The octave will be 2
This time switch the type of synth from the downhill line to the squiggly one
And turn the knob under tune to OSC 3 PW 64
On your low pass Ladder Filter make sure 123 are selected
Now lets move over to the filter envelope
Set a to 1.9 d to 349 s to -48.2 and R to 705
On the amp envelope set a to 1.2 d to 349 s to 0 and r to 1.09
Now we are going to make the sound change for your modulation wheel, for source go to performance and click mod wheel, set the amount to 64, and for destination go to filter 1 filter frequency
Now add a BV512 Vocader switch the fft knob to 4 band and switch the knob from vocader to equalizer
Switch the decay to 127
Move the shift to -30
move the hf emph to o and the dry wet to 127
Now create a RV7000 Advanced Reverb and select all warm plate
Now enable the eq
Set the decay to 0 the HF damp to 25 the hi eq to -4 and the dry wet to 18
Now create an mclass equalizer and selct the 30 hz lo cut button
On the lo shelf set the frequency to 106.2 and the gain to 1.7
Now select the button on param 1 and set the frequency to 114.9
The gain to 4.6 and the q to 4.9
Next create a mclass maximizer and set the input gain to 6
Select the 4ms look ahead button
Set the second fast button to auto
And switch the peak button to vu

Category:

Howto & Style

Tags:

• Benny
• Benassi
• Bring
• The
• Noise
• synth
• tutorial
• pumpkin
• satisfaction
• rock
• rave
• lucky
• date
• techno
• house
• dance
• electro

[KingOfLalilu]

how can you open the yeah yeah synth file in your combinator? I'm only able to open it in my thor syntheziser? This might be why my outcome is pretty different...

Thanks for your help

[luckydatevideos]

right click on your thor and select "combine"

[daraksta]

somewhere along the way you gained a combinator and an RPG8? Is this important?

[luckydatevideos]

no its not

[khrisCRISIS]

Hey!

I did everything in this Video, and did the video for the Bodyrox synth. And the outcome didn't turn out as this. I followed everything. The pumpkin synth turned out really low and it doesnt release. Could you possibly help?

[luckydatevideos]

make sure you use the init patch

[bisphenolA]

Its Propellerhead Reason 4.0

[xRickRetardedx]

Wow this sounds so much like the real beat

good job man 5 stars

[Travelisation]

also minimal poppy sound??

[Travelisation]

hey dude, i got to the bit with the merger splitter and now there is no audio at all???

[0beyTv]

can you make a video on where u show where to write the notes to this?(:

[TheOfficialWeiss]

@KingOfLalilu Sir,You Have An Epic UserName

[BodyRocker9]

How do you side chain but mute the kick drum and still be able to hear the effect

[3DazeStudios]

thanks a lot it sounds sick the only thing is that the combinator loads but wont play when i load it into a new song. its wired into the mixer its not muted and it recognizes that im playing a note on the keyboard but theres still not sound help?

[3DazeStudios]

thanks a lot it sounds sick the only thing is that the combinator loads but wont play when i load it into a new song. its wired into the mixer its not muted and it recognizes that im playing a note on the keyboard. help?

[MrMasterLG]

how about the synth from the party rock anthem. if u can help me out with that please inbox me so we can network . cheers!

[NRJDJ]

what is the name off the program? and can i get i for windows? ;)