DIY CNC Router Demo
Loading...
Uploaded by haydn812 on Jul 15, 2007
Homebuilt cnc router machining a guitar body
Uploader Comments (haydn812)
Top Comments
-
Engineering is SEXY :)
2 years ago 15
-
Don't suppose, you could forward some plans?
Excellent machine.
2 years ago 6
Video Responses
All Comments (84)
-
q nr2. what music is that?=is cool
-
do you sell it ??
can you make one for me ?
-
i will like to buy that cnc from you how much do it cost? i really need it
-
I would love some plans and a parts list. I do my stuff the old fashioned way with hand tools. I should say feeding the work by hand and using templates, etc.
-
What surfacing bit is that?
-
@andr123w Its probably for a glue on neck. Or you could be right and thats the worst bolt-on design ever.
-
Awesome for a homemade machine!
-
What music is that?
- 4:35
How to build a CNC routerby HearGear355,143 views
- 1:12
CNC Router cutting the Wood Dragon mad fron Harding wood from Thailand.by Theppuen470,542 views
- 9:59
DVD Volume 2: CNC Guitar Machiningby ScottGreen8332,042 views
- 2:45
Hobby CNC Machineby gpm4985337,199 views
- 2:42
Thermwood - 5 Axis CNC Router at John Cox's Creature Workshopby ThermwoodCNC437,066 views
- 33 videoscnc
- 2:24
HomeMade CNCby kapbrasil442,927 views
- 0:26
CNC cutting wood for the demon who causes eclipses3 4by Theppuen177,729 views
- 0:11
Ultra-low cost Mini-CNCby 1kreature42,726 views
- 0:36
Best router table everby QuentenBeaux41,822 views
- 7:06
WOODWORKING MADE EASY FRAME- PANEL- DOORS 2 OF 2by BeachsideHank88,705 views
- 6:59
Router Tables Made Easyby SommerfeldTools279,130 views
- 4:06
W. Jeffrey Jones Hand Made Guitarsby SearcySW35,901 views
- 1:00
ez Router Scorpion Cutting @ 2000ipmby ezrouter65,973 views
- 2:00
Prototype Overviewby Caleb654349,799 views
- 3:25
DATRON Engraving Machine - Rose Embossing Dieby DatronCNC132,123 views
- 1:06
Scott's Completely Homemade CNC Machineby mx5man2005274,875 views
- 3:40
DIY My homemade Semi hollow body Guitar & Guitar Caseby Springfield762188,790 views
- 7:34
CNC ROUTER 5' x 10'by roonster7196,414 views
- 4:05
Gemini Wood Carving Duplicatorby allredcorp282,627 views
I see that you are driving the gantry in the X axis with a single ballscrew shaft mounted in the center underneath the table. Is there any problem with yaw (clockwise/counterclockwise rotation as viewed from above) of the gantry with that setup? Do you think it would have been better to drive it with a ball screw on each long side of the bed? Planning my own CNC plasma machine, so that's why I ask. Great vid by the way!
davi200 3 years ago
No problem with yaw (or crabbing), it depends on the spacing of the x axis carriages. Two screws can cause twice as many problems as one, not many commercial machines use two screws. If your building a plasma then you certainly wont need two screws as the load on the gantry is minimal.
haydn812 3 years ago
How much would cust this machine?
Baraquiel62 3 years ago
£2000 to build approx
haydn812 3 years ago