Aromaz CFL Circuit
Loading...
Link to this comment:
Uploader Comments (Lidmotor)
Video Responses
All Comments (24)
-
Hello, how much ohm has your primary of coil?
-
This is very interesting!
-
I like the idea of moving the earth-ground around. I tried putting GROUND on the output of the coil in the bodkins/bedini curcuit and the advantage there is that you can touch the HOT of the coil and not get zapped since it is ground relative .. yet all still works.
-
Thank You for posting this..I am still scratching my head why this circuit acts this way..
-
Yes, you're right, the Earth and a human give off the same energy. Plus, we, and the Earth, have a bit of resistance in us as well. That is why some equipment will not run unless it is grounded. I came across a digital 220VAC dryer control that ran on 110VAC and when you would push it to go into the kfluf cycle, it would click the relay, but than click back off about a second later. It turns out that it REQUIRES ground to operate properly. Also worked by touching the ground pin to your skin.
-
actually i did this the other day (read above) and it appears that Earth is an AC current. same frequency as a human. tested this on an amp... it seems that humans and the earth itself runs on radiant energy
3:03Completed Fuji Circuit CFL Driverby myvideoisonutube6,027 views
- 4:23Aromaz CFL Circuit--Part 2by Lidmotor2,854 views
- 1:57Water Sparkplug IIby smw1998a38,831 views
- 5:13Aromaz 003 - Original discovery Dynamic Resonan...by Aromaz20127,362 views
- 6:18SKYWATCHER-- CFL and Charger using wall outlet ...by Lidmotor2,316 views
- 5:01Bodkins Earth Energy Experiment --Replicationby Lidmotor16,442 views
- 6:47CFL and JT combination lightsby Lidmotor1,122 views
- 3:55Aromaz 006 - Original discovery Dynamic Resonan...by Aromaz20121,757 views
- 9:53Aromaz 013 - Dynamic Resonant Energy - Conclusi...by Aromaz20121,045 views
- 4:53Lidmotor Christmas CFLsby Lidmotor2,112 views
- 2:22Health Effects - Compact Fluorescent Bulbsby factsnow49,406 views
- 5:31Mini Box CFL Lightby Lidmotor14,300 views
- 10:13aromaz CFL circuit replication (violet light ob...by morpher44549 views
- 9:56Imhoteps Radiant Oscillator lite cfl alterationby kojsza27,604 views
- 8:25Super Simple CFL Drive---solid stateby Lidmotor3,889 views
- 0:41Another Clanzer experiment from 2007by Seacrhing2008789,278 views
- 8:49Inverter CFL Light & Battery Chargerby Lidmotor24,567 views
- 10:00Radiant CFL Oscillator 02 (PWM) - One Wire Sparksby dodoshlodo7,252 views
- 5:05Ren's two transistor CFL circuitby Lidmotor2,595 views
- 0:25555 Timer Throbbing/Fading LED without Programmingby Gorfickle28,318 views
Looks to me like you are simply building a tank circuit, hence less power is required as resonance is approached. The earth ground is a virtual ground being that there is no reflection path.
There is a noticable change in frequency when the ground is connected. This seems very much like a tank circuit. I'd bet that a simple cap of proper values would produce the same result.
I see no reason to believe that this is anything but resonant action *tank circuit*
434F503E31 3 years ago
434F503E31----Check out Aromaz2012. This was his idea. He has posted a whole video series about what is happening here.
Lidmotor 3 years ago
I love the simplicity of this circuit, sure beats frying the 555 timers!.. I have 10 transistors on order :)
mart
marthale7 3 years ago
This is about as simply as it gets. Today I took away 2 of the transistor and it still ran.
Lidmotor 3 years ago
LId, Did you maintain the 2n222 and the darlington pair? IF not, what remained? Thks, LO
LoneOarman 2 years ago
LoneOarman----I did all of this along time ago but as I remember this circuit diminished down to just a two transistor Darlington pair of either a coulpe of 2N2222s, 2N3055s. or a combination of both.
Lidmotor 2 years ago