How a Two Stroke Engine Works by Mount Motor

Two Stroke

Category:

Autos & Vehicles

Tags:

• gas
• scooters
• Two
• Stroke
• Mount
• Motor
• engine

[bigsamsilk777]

which one are Japanese and which one are U.S.made scooters? and can i sell my scooter to this company!

[mountmotor]

Sorry, but we do not buy used gas scooters, but if you would like, we can fix that scooter, if you send it to us. Depending on labour and parts, prices may vary. BladeZ and Go-Ped scooters are both made in U.S.A. and Japan. These are top-of-the-line scooters. The best!!! We hope this will help!

-The Mount Motor Support Team

[bigsamsilk777]

un able to do an video. my xg-505 gas scooter will not start. it takes me 15min to get it started. my electric started does not work because onces i push the starter I hear a cranking noise and a puffing sound from the engine, and I have to use the pull starter to start but it takes over 50 pulls or more trying to start it. once the engine is running it turns off and keeps shutting down. also the engine is very loud when riding and when not in motion.

[mountmotor]

Sorry, but we think that is it better to sell that scooter before it completely breaks. Try to buy Japanese of U.S. made scooters.

[bigsamsilk777]

I am about to give up on my xg-505 extreme gas scooter. The resaon why is because my gas scooter takes over 50 pulls or more to start the engine and plus it goes about 15 miles mph instead of 33mph. I really need some help or i just have to sell it. Tell me what do i need to do to make it faster and to stop the cold start

[mountmotor]

Hey there,

We read your comment. Your scooter is Chinese, which means that it is not Great quality compared to other scooter companies which are made in Japan and the U.S. We can help you, but you must give us a great explanation of the scooter and its problems, such as noise of the engine. If you can make a video of it that would be great, so we can better understand what is going on with your scooter.

Thanks!

-The Mount Motor Support Team

[MrBeastly22]

Hey, I was woundering ware you get your performace parts.

[snobum101]

make sure your mixtures are good and you said you dont want to buy anything BUT an air filter would increase low end torque and if you get one make sure you buy it with a velocity stack!!!! they would only be about

30$ all together

[mountmotor]

If you take apart your motor you must be VERY CAREFUL!!! There is a cylinder head gasket.You might be able to reuse your gasket(depending on age and usage of the motor.) The gasket will be oily,(easy to rip), so you must handle the gasket with real care. If you need to buy one, they are only a few dollars. (not a Big deal).

Hope this helps!!!

-The Mount Motor Support Team

[itwasflaminupgood]

Hey thanks. I just have one more question. If I take apart my gas scooter engine in the future is there a head gasket that I will need to replace if I take it apart? Is there any gasket at all? or if there is, is it reuseable?

Again thank you so much for your advice!

[mountmotor]

We watched your video and everything sounds good on your gas scooter. Your good to go!!!

Check out Mount Motor Dot com for gas scooter products and FAQ's.

[mountmotor]

Hey there,

No problem. We will get your problem fixed. (If it is one!)

[itwasflaminupgood]

hey it looks like you know a lot about 2 strokes. i was wondering if you could please tell me if my 49cc gas scooter sounds like its running really rough or bad. it seems like its really loud compared to other gas scooters of similar displacement. i have a stock muffler and a air filter assembly. and if you are going to help me dont watch the one where im driving it. do the "cold start gas scooter" vid, you can hear it better. thanks so much

[buzztron66]

I have a BladeZ 35cc Tanaka pave runner gas scooter and I was wondering why theres no torque is that common for all bladeZ scooters and is there a way to fix that without buying any performance parts

[STEVOJUMP]

nice vid EXELLENT