Thule Professional Ladder Rack Awning Assembly

http://www.etrailer.com/tv-assembly_thule_awning_TH326.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This awning mounts onto Thule's professional load bars as well as their other lines of load bars. Before we mount this on our bars there's a few little things we have to do. First we have to install the T-nuts that go to the track at the bottom, and the we have to install the caps to close them off. There will be four T-nuts for each track. After this cap is installed, we go to the other side. Next we need to install the clamps that go into the load bars, that's a simple strap right here. We'll put a couple of bolts in and hold them loosely in place and slide this whole assemble onto the load bars. Our next step would be to go ahead and get an extra pair of hands and mount the awning on top of the bars. Once you get the awning situated the way you want it on your load bars, then go ahead and clamp them down into place. We need to make one technical note here, this awning is specified for three load bars, instead of the two shown here. Chances are this will be used on a van as opposed to a pickup truck bed but everything still applies to that application. That covers it for part # TH326.

Category:

Autos & Vehicles

Tags:

• thule
• professional
• ladder
• rack
• awning
• assembly
• instructions
• etrailer.com