jawa film {retro twin}
Loading...
25,032
Loading...
Uploader Comments (terence20001)
Top Comments
-
That bike is a work of art. It would really turn heads, riding down any street in America. CLassic, Retro and Exotic, all at the same time. I love that moulded seat end. 5 stars***** RH DSD
-
I was wondering if you could do a video on the Jawa showing it up close and personal. They may be common (or not) in Europe, but extremely rare in the U.S. I am sure our American audience would love to see it. Thank you. Randy H
see all
All Comments (105)
-
Thanks i'll have a look
-
@terence20001 I think, Jawa is the best motorcycle :D Your Jawa is great :)
-
@barnbersonol Hi sorry for my bad grammer you have a good point most views are from outside of the u.k. i'll try to remember Terry
Loading...
This vid went viral on Benin
llenbridges11a 1 month ago
Thanks for info . i'll have a look
Terry
terence20001 1 month ago
but, if you cut the fork tubes, how are you sucering them?? machining new htread?
enfielddnepr 5 months ago
@enfielddnepr Hi Arnaud , Yes they have to be machined . Mine were done in a machine shop so this would have been a straight forward job for them . Terry
terence20001 5 months ago
But.. 2 things i do not understand.. another film sya the front end is lowered..
How??
And the rear is raised? but i have the same shocks on my enfield(must be very hard for an jawa, as they need some re-work to function adequaltely on my enfield) and these are shorter then the original ones?
enfielddnepr 5 months ago
Hi , Yes the rear shock's are 13mm shorter than standard so you would expect the rear end to be lower ! But i've welded different swingarm mount's to raise extra 40mm so with these shock's the rear is about 27mm higher than standard T.S. 350 , All this was done to have the look i wanted . If you compare standard front end to my jawa you will notice the fork tube's (stanctions) have been shortend 40mm taken off . You may have to look close to compare but this is how i done it , Terry
terence20001 5 months ago