Planer knife honing jig
Loading...
Link to this comment:
Uploader Comments (stevemaskery)
All Comments (7)
-
Ahh Perfect just what i was looking for! Thanks Again Steve I'm off to build it now i think a nice lump of beech ans some poly is in order!
-
Just wanted to thank you for putting this up. This works great. I made one today based off your design and I can believe how sharp I got my blades. I used a combination of oil stones and the scary sharp sandpaper system on a piece of glass.
Sharper than a razor.
-
great idea, I want to make one soon...
thanks
Dennis (freewoodencrosses)
-
Steve, you have another winner here. It's a stroke of genius to put both blades in the holder so each one acts as an angle guide for the other. The only thing that could be improved would be to put on a couple coats of finish to allow you to wipe the honing oil off. 5 stars & favorite, as usual.
10:34Build a Planer/Jointer Knife Sharpening Jigby GarageWoodworks2,567 views
- 1:26Scary Sharp Demonstration 01by kiwa200625,017 views
- 2:43Changing planer bladesby Wooditis3,607 views
- 0:31How To: Homemade Clampsby bobvila2,156 views
- 9:51CJS knife grinding jig (part 1)by bassthumpintwion8,026 views
- 2:27Messageboard Grinderby MrSrslySirius441,689 views
- 4:19Cutting A 26 Inch Box Jointby jpheisz4,382 views
- 3:53Preparing Rough Lumberby GarageWoodworks8,953 views
- 2:30Planing boards wider than your jointerby Matthiaswandel45,884 views
- 1:03Tormek Planer Blade Attachment SVH-320by TormekSharpening24,842 views
- 10:37two dollar sharpening jig.aviby capneddie42,788 views
- 11:07woodworking - Setting Jointer Knivesby knecht10520,656 views
- 8:23Deulen Tools Jointer Planer Knife Sharpenerby deulen13,879 views
- 2:03Cutting Rabbets on Your Jointerby handi459,478 views
- 4:51Sharpening Jigby jpheisz5,813 views
- 0:24Sharpening Chisels and Plane Irons using Tormekby bestsharpening12,776 views
- 5:25Mastersmith Hanford Miller demonstrates the Lev...by ABSwebmaster4,567 views
- 9:59Rob Cosman Sharpening Plane Blades Presented by...by woodcraftmarketing24,781 views
- 11:53Festool Cordless Drill Myth?by jgm867524,162 views
Very nice idea...have any thoughts on a 3 blade system ?
Thank you : )
sneezie22 3 months ago
@sneezie22
Yes. Number them 1, 2 and 3.
Do 1 and 2 for, say, 20 strokes. Then do 2 and 3 the same, and finally 1 and 3. They will all be right.
S
stevemaskery 3 months ago
@sneezie22
Yes. If you have three blades you sharpen 1 & 2, then 2 & 3, then 1 & 3, all with the same number of strokes.
Regards Steve
stevemaskery 1 month ago