Adjustment of Turnigy T9x v2 for RC simulator
Loading...
Uploaded by richardmrazek on Feb 3, 2011
Adjustment of Turnigy T9x for RC simulator, for flying on RC simulator without a mTx modul removing.
More on
www.ok-rimr.com
- 41 likes, 0 dislikes
-
Uploader Comments (richardmrazek)
All Comments (46)
-
@archedperson thanks for the info
-
@LTF85199 I used a usb to 3.5mm sim cable and transmitter works without the battery when plugged, so you don't have to worry about battery life.
I use the "9 in 1 USB Simulator Cable Support FMS G4/G4.5/G5 XTR AeroFly RC RealFlight" which I got from eBay for 17$. It comes with the above sims plus Phoenix RC 3 and Reflex XTR 5.03
-
i tried Pheonix RC Sim with Eurgle 9x, the module is removable (
Even when the module is removed it doesn't work right, my throttle is mixed why my ailerons, all commands are wrong. Any solutions??
-
thanks! it works
-
You da man Richard 8^)
-
what next? how do I use it on my pc?
-
Thank You you do a great job! keep up the good work!
-
Hi, cable USB. Tks
-
Ok 1000Ohms = 1k
- 15:33
T9X - TH9x - Er9x - Cable Installationby richardmrazek11,099 views
- 2:42
Using the moded HobbyKing Turnigy 9x with the Flying Model Simulator (FMS)by tsisapik5,941 views
- 1:40
Turnigy 9X with FrSky Telemetryby artpam10,893 views
- 0:54
HobbyKing 401B AVCS Digital Head Lock Gyroby MrChefpilot25,038 views
- 7:23
Hardware change a Mode a Turnigy (Imax) T9x Transmitterby richardmrazek9,198 views
- 1:39
Turnigy 9X modificationsby MrKalaspuff8,537 views
- 0:54
RealFlight Basic RC Flight Simulatorby hobbico123,710 views
- 8:33
Talking about the Turnigy 9x 2.4ghz systemby Allwaystaynfly11,944 views
- 0:15
Turnigy 9X + ER9x firmware + FrSky two-way RF moduleby alexcmag8,883 views
- 5:52
RC FPV Kit HobbyKing 900MHZ 200mW Tutorialby sfabiom50,571 views
- 14:57
Turnigy T9x - Function Settings - part 2by richardmrazek6,977 views
- 3:22
HK-T6Aby mYfLASK15,265 views
- 14:50
Turnigy T9x - Function Settings - part 1by richardmrazek12,529 views
- 4:06
P-51 Mustangs in the air - The P-51 Mustang Video - "Sketches of Freedom"by gregersgram786,755 views
- 18:37
T9X - TH9x - Er9x - Backlighting Installationby richardmrazek5,991 views
- 3:00
Turnigy 9X REVIEW By: MrRCFlyyerby MrRCFlyyer7,130 views
- 2:30
How to Increase the Tension of your Turnigy 9X Sticksby MrRCFlyyer5,152 views
- 2:01
Turnigy 9X V2 RC Transmitter Binding with Eurgle 3Ch Micro Receiver. Radio Control Hobby Kingby BMSWEB11,637 views
- 6:29
Turnigy 9x video manualby cruzroycruzroy6412,594 views
1k ohm = 1000 ohm if i am correct?
Sandor159 3 months ago
@Sandor159 Exactly how you say :)
richardmrazek 3 months ago
what is a module used for? is it not the thing that make the radio waves, so when you are using the Tx as a simulator,wouldn't it be better not to use the module so that it will give you better battery life?
LTF85199 3 months ago
@LTF85199 Hi, battery life? I think, a safe using of radio is more important. And if you will often remove a module, you can seriously damage a wire to antenna...
This is a safe mod, thousands of use...
richardmrazek 3 months ago
thank you. it works with out the module, but it could not be calibrate i have try it so many time without module and i was not been able to calibrate it with the software
ghassaantalhouk 5 months ago
@ghassaantalhouk can you try it with "standard" USB interface, with calibrating in windows (in Control Panels in Game devices - joystick) and with for example RC Desk Pilot? How is your interface now? Maybe will be better, if you will send me a PM...
richardmrazek 5 months ago