Plaster Of Paris
Loading...
Uploader Comments (BRUTUSPLAC)
All Comments (18)
-
@BRUTUSPLAC Hide that shit, Antonio Margarito is gonna wanna steal it!!!
-
@BRUTUSPLAC You dont use cloth ur supposed to use like kitchen paper. If you use stuff like cloth in your case or newspapaer it will crack which is what caused it to peel off. SO use kitchen roll :)
-
Black Sabbath and plaster of paris does not mix well.
-
Plaster of Paris is GRAINULAR and get bubbles in it. THE ONLY way is to get the intire stuff pulverized before one mixes it to finer than powder. IT IS TERRIBLE IN MY OPINION for smooth surfaces-but where does one get PLASTIC from scratch? I speak in liue of my (slow bumper speed vehile sticker and part time THE BOX many years.)
-
I always go a little less on the water then they say.
-
FIVE GUYS!!
-
@BRUTUSPLAC no problem. thanks for the kind words!
3:43
Life Casting: How to Make a Mold of Your Hand with Alginateby SmoothOnInc143,158 views- 9:44
Plaster Casting with Merlin's Magic Plaster and Deep Flex Molds (2/3)by ThePlasterMaster4,608 views
- 7:21
Plaster Wall Tiles Part 2 2008by CapricornArtist7318,780 views
- 9:37
Mold Making Technique: Plaster Bandage Mother Mold Processby brickintheyard41,451 views
- 7:55
Cast Designs Ornamental Mouldings Profile by PBS.VOBby CastDesignsMouldings61,456 views
- 9:55
Basic Silicone Mask Makingby brickintheyard413,694 views
- 10:00
How To Fiberglass - Two Part Mold Construction - #1 Flangingby punk28186426,760 views
- 9:41
MAKING A PLASTER MOLD FOR A LANDSCAPE VASEby potteryworks7,761 views
- 8:23
RECREATING MYSELFby daligoddess200664,305 views
- 4:51
How to make a two-part moldby tapplastics839,182 views
- 3:43
how to plaster of paris ho trains(part 1)by allaround13312,100 views
- 8:24
How to Make a Mask Part 3by demonj626,414 views
- 6:28
Mold Making and Casting Tip: Mixing Hydrocal Plasterby brickintheyard33,057 views
- 5:36
Plaster of Paris - How to Make Shapeby supertecfoundation2,454 views
- 7:13
Plaster of Paris Castingby langergrp4,302 views
- 5:43
How to make a Plaster Cast of a Handby LeonardoDiCapriSonne59,086 views
- 3:59
HobbyCast - How to make moldsby gametavern145,981 views
- 1:04
High speed machining centre for manufacturers of Plaster of Paris and resin mouldsby MarbleandGranite30001,117 views
- 2:57
The Basics of Plaster of Paris - CraftProjectIdeas.comby CraftProjectIdeas7,277 views
i had no idea what to use when plastering a drywall but i found that this stuff works quite good but it took a while to do but it worked good and its not even noticeable. Also i would take a thick paper towel like Hokaun said
skatinggenius5 1 year ago
@skatinggenius5 THANK YOU !
BRUTUSPLAC 1 year ago
use paper towels next time not a towels
hokaun 1 year ago
@hokaun THANK YOU !
BRUTUSPLAC 1 year ago
that is very unfortunate. i believe the mix was not mixed well enough becuase the plaster will crumble if it is to dry on the application. if it crumbled, the plaster might not have soaked thoughroughly. also, there could have been air pockets.
TheBombBros 2 years ago
@TheBombBros Thanks for the help !
BRUTUSPLAC 1 year ago