200x problem

Okay just to let you guys know, I had the petcock turned off haha im so stupid. but i guess theres a first time for everything :P

Category:

Autos & Vehicles

Tags:

• atc
• 200x
• threewheeler
• 1984
• honda

[dcole72]

more than likely a carb rebiuld would do some good , there not that pricey

[triz250rtecatedude]

i already got a 200$ carb job

[makaveli087]

Hard to tell since it barely ran but check the adjustment of your throttle cable on top of your carb. Adjust it running and that'll likely fix it if you havn't made any recent adjustments on the carb.

[triz250rtecatedude]

haha man it would have helped alot if i would of had gas in the tank lol

[1ellieo]

yeah i had a 86 200x just clean the carb real real good and on the throttle slide take it apart too take the spring off and pull the needle out it will have a C clip make sure it is in the middle of all the grooves on the needle this might solve some of the problems dont loose the c clip... plus with surtin pipes the carb has to be jetted and check the oil if it smeels like gas change it if you dont it will wash the rings out

[triz250rtecatedude]

would the piston be good if your ring r shot

[dairyfarmboy97]

@triz250rtecatedude haha $200, u can buy brand new ones off ebay for $20 lol

[hondarider200m]

clean out the fuel line's and take the carb apart clean the jets

[yelkyarg11]

the smokeing can come from bad rings and to much oil and u shouldnt spend that much on a carborater

[yelkyarg11]

yes ur piston would be fine and the smokeing can come from to much oil or the rings r bad and u need to replace them

[yelkyarg11]

yes ur piston would be fine

[megasv1000]

It wont idle unless the idles turned up will it. I have 2 of these your rings are worn.these almost never have carb problems unless someone takes it apart or changes something

[IAM2THEASSASSIN]

@triz250rtecatedude did u buy a new carb?

[komori640]

Try changing the oil and cleaning out the carb

[candypurplestampede2]

Re-jet the carb and adjust ur idle

[rexxmasta]

Turn down your idle man>.> and your carb pin might be bent