I/O Stringer w/Frit 1of3
Loading...
Uploaded by RKGlass on Apr 9, 2007
This is a pipe with stringers and frit. It has a bend to the neck and feet to hold it steady. Real simple pipe.
Link to this comment:
Uploader Comments (RKGlass)
All Comments (23)
-
@RhyminRhymnoceros it look s like the one just bigger tha powder , or the powder
-
@beachboy8969 looks like 9.5 mm and i think its lik 2mm thick , thats what i use
-
song is fucking gay
-
i would aslo like to know what size tubing you use
-
What size frit d'you use mate? Ive tried that technique with NS jet black powder and things turned ugly fast! Ive also tried with NS Turbo Cobalt Small frit, but it turned out splotchy and didnt look solid - cool effect but still wasnt the same effect.
-
what size tubing are you using for the pipe and for the punty/blow-pipe
-
yo mape ex most of it is actually in how fast you rotate the piece and your skill... it doesnt get hotter just bigger unless u were to crank your oxy then it gets colder. just practice with it.
9:58Dot on Dot Implosion 1of6by RKGlass1,896 views
- 6:15Blue Tubing Enclamo Pipe 4of4by RKGlass8,981 views
- 10:00Seattle Pipe 3of7by RKGlass3,417 views
- 5:00Seattle Pipe 7of7by RKGlass4,721 views
- 9:58Dot on Dot Implosion 2of6by RKGlass639 views
- 10:01Seattle Pipe 4of7by RKGlass2,681 views
- 9:58Dot on Dot Implosion 3of6by RKGlass552 views
- 10:00Seattle Pipe 5of7by RKGlass2,476 views
- 10:00Seattle Pipe 6of7by RKGlass2,595 views
- 9:58Dot on Dot Implosion 4of6by RKGlass287 views
- 9:58Dot on Dot Implosion 5of6by RKGlass327 views
- 6:05How to Create Your Own Glass Fritby PrairieStainedGlass3,406 views
- 2:45RA Glass making a glass pipe, part 4by claydancerpottery3,482 views
- 5:01♥ Lampwork Glass Bead Demo ♥by Tiera8620,129 views
- 2:52RA Glass making a glass pipe, part 1by claydancerpottery11,640 views
- 0:30bend_glass_stringerby YuriRaud13,327 views
- 6:42glass blowing the orbby crookedgrindstorm8,500 views
- 10:01Flipped Honeycomb Pendant 1of3by RKGlass12,774 views
- 5:21Glass Blowing. Rasta Pipeby Burritoast16,858 views
- 7:10I/O Stringer w/Frit 3of3by RKGlass5,682 views
Never seen stringers done that way. Interesting. Looks easier than actually drawing on each one. But how does it work when you want the whole inside coved in stringers? Cracks? Either way, I have to try it now!
frayedges25 1 year ago
well part of the reason I do it that way is that its hard to draw them with a midrange. I have a redmax with a rider and I can draw them on with the rider. If I am doing prodo work that doesnt need precise stringer placement or full stringer coverage this is by far way quicker for me. I dont get cracks but thats because of practice.
RKGlass 1 year ago
mostly likely 38 heavy. its been a long time, but I think at the time I think I was buy cases of 38 heavy but who knows anymore???? And for the frit size...the smallest? its not powder and its not the larger chunks. And the stringers are just ones that I pull, so the size just depends on my mood.
RKGlass 2 years ago
Do you really crank your oxy and prop? I got a brand new mid range nortel and it just doesn't seem to get as hot as yours...
mapexlb 4 years ago
I set my oxy a little higher than it ask for but I also push it to its limits...dont be scared experiment with the settings (regulators that is) till you get the flame you want.
RKGlass 4 years ago
ye dude, but doesnt that extra pressure n shit wear on the equipment more. couldnt you just wait a little longer. but thats just from what when ive fucked around in my classes.
ivebeenshotafied 4 years ago
Of course it does but I dont run it on full blast the whole time. Sometimes I just need a little more heat and waiting a little longer doesnt mean the piece will get the temperature I need it. I have a redmax and CC; both I set a little higher also. I am expecting to put wear onto my torches (thats what they are for!).
RKGlass 4 years ago