Mazda Rx-7 FC with bridgeported 20b revving!!
Loading...
Link to this comment:
Uploader Comments (botchla90393)
Top Comments
-
noob
3 years ago 6
All Comments (33)
-
@botchla90393 It throws off the weight balance towards the front but quite a bit actualy, it may not seem like it but there is alot of extra metal on the 20b, you are pretty much adding another half engine to the car, a 13b weighs about 155lbs, then add the extra rotor, longer E shaft, 80mm front intermediat housing, and pretty much every other part of the engine elongated a 20 will come out to about 300lbs after install give or take, so its an extra 145 lbs on the front of the car
-
That thing sounds mean
-
@laythesmack23 that is correct =] good comment as well.
-
@LegendaryFC3S Throw the battery in the back, and put a subwoofer, I think that should out weigh the extra rotary ;)
-
@LegendaryFC3S i like the FD3S but my bro has a FC3S and i would have that any day
-
RX7 rządzi ! :D
-
this revs to 9k rpm no problem.
-
cool
-
Are you kidding me, rotaries loved to be reved past the breaking point, especially with microtech ecu's & haltech's you can program the ecu's to rev up to 16K RPM, that's redlining.
These motors are made for high rpm. Why do you think they banned them from Le Mann's 24 hour race. Mazda Won with the 787 quad rotor, still hold's a record with a rotary motor. No way, 20b is bad ass.
-
Nice that cars really clean.
- 1:21Rotary-Works 6 Rotors Drift Cars Idling !!!by ReneMotorSports106,258 views
- 0:16Andrew's NSX Rev - ARC Titanium Exhaust & Headersby chill7777711,738 views
- 0:14NSX 3.6L Stroker w/ ITBs uncoveredby PonyboyF121,761 views
- 1:01Turbo NSX Teaserby synteg139,223 views
- 1:39Dyson 20B rx7 7.80@183mphby hockeytones26,942 views
- 0:27Sick RX7 Takeoff - LOUDby ssgoten025382,572 views
- 1:21MAZDA RX-7 13B Rotary Engine Portingby driftingcom79,584 views
- 1:4720b periphial ported turboby NealatSpeedworks174,757 views
- 1:21Mazda RX7 S5 FC3S LED lights walk aroundby streetphase42,954 views
- 1:21Peripheral Port 20B Racing Eunos Cosmo | Mazdas...by Mazdas24795,335 views
- 0:364rotor Mazda RX7 FDby 993ti866,301 views
- 1:02Rebuilding a Rotary Engineby gurcell197,626 views
- 0:0920B Single Turbo 3rd Gen RX-7by aaroncake126,596 views
- 2:0120b na jc cosmoby illdrift179,201 views
- 0:56My BMW-20B Rotaryby BMW20B143,924 views
- 0:28Peripheral Port 12A Rotary Turning Over (Long)by aaroncake201,494 views
- 1:22Mazda Rx7 Race Car Idle & Rev Peripheral Portby FaytTang159,208 views
- 1:00R.E. Amemiya 20B RX7by onelife2stories291,741 views
- 9:42RE AMEMIYA 20B Disassemblyby RE7WERKS74,007 views
Wonderfull car. I love RX-7's especially the FC. I was wondering does the FC retain it's 50-50 weight distribution with the 20B swap?
LegendaryFC3S 4 years ago 2
That's a very good question, but I am not sure sorry.
botchla90393 4 years ago
Very NICE,Is it PP?
13BturboS5 4 years ago
it's a BP
botchla90393 4 years ago