CRAZY GOPED PROJECT

well here ive been design this goped for a few months now and i finally just put it in progress so here it is!! it not finished as you can see i still have alot of work ahead of me so on here is a 6.5 HP lifan engine that im turbo chaging and putting NITROUS as well i built the chassis from 1 1/4 square tubing racing go kart slick, live axle set up ect. ect so i will post updated vids thanks for looking comment me please with any suggestions

Category:

Autos & Vehicles

Tags:

• Goped
• pocketbike
• extrem
• turbo

[samwel69]

wheres your oil pipes for the turbo, the turbo needs a costent suply of oil or it wont work

[GTS4SUM]

your gonna have to lean on the right to counter balence that bad boy

[SquatchyActivity]

Gook

[sc38converter]

@davison1021 because you only have 1 cylinder the best turbo would be from a VW jetta TDI, and would spin up better doto its small size (air volume). and put some kind of muffler between the engine and turbo to even out the pressure because the turbo will pulsate with the exhaust and not work at all. then put the carb on the front of the turbo so you dont bubble the carb. then watch the crank fly out like a ninja lol

[dopeyd70]

I couldnt see an oil feed and return for the turbo, a little concerned.

[phambo101]

Oh my glory, what in all that is unholied am I looking at here?!!! Just where on this great green Earth is this dude planned on driving this "thing?," in the backwoods against some inbred rednecks?!!!...

That fat rubber in the back is pretty bitching, nontheless!!!

[TheDenverBuckRC]

ok i have problem so like a year ago i took off the govenor on my go ped to make it faster but now when i want to ride it, it starts i give it gas but doesnt go... help me please im trying to sell it

[509horse]

shit its going to suck in the camera

[doomsd46]

Looks to be a TD02 or similar turbo. There aren't many turbos that small. Even if it is a TD02 (Which, I think is THE smallest turbo ever produced excluding any custom made ones) a 6hp engine is usually 150cc-200cc-ish and that turbo might still be a touch big, but it would work still, more turbo lag though. Very, very cool though! :D I am looking at buying a TD02 for my hay baler engine motorbike, its the perfect size, my engine is right near the top of its range.

[MrAndvik]

I'd like to see the finished thing... If you got that far...

[sentementle]

that turbo was junk , way too much play and no oil feed if im not mistaken