Homemade Airgun (shot with 7 bar / 100 PSI)

Shows my selfmade airgun shooting with 7 bar or 100 PSI...I think 10 bar (145 PSI) is also possible ;-)

Category:

Howto & Style

Tags:

• Airgun
• Homemade
• selfmade
• gamesagent
• bar
• PSI
• softair

[zack82008]

how did u connect the tank to the pipe anser quik im makin 1

[Gamesagent]

@zack82008 I have the tank and the pipe simply screwed together and sealed.

[MrPopokakadodo]

which valve do you use as trigger???

could use an answer soon? going to make one myself :D

[Gamesagent]

@MrPopokakadodo I used a ball valve ;-)

[pietzeekoe]

i think the gun can handle more then 7 bar

[Gamesagent]

That's right ;) I shot with 10 bar already =P

[Crash29930]

DUDE thats awesome i see you are using a bicicle pump, you can get an incredibly good air pump from a refrigereator (up to 20 bar at least!)

questions: what airtank is that?

[bulletisleet]

ur just trying to teach us english lol.

[BMXplayer85]

hey ich hab auch ball valve airgun selber gebaut aber bei mir kam nach kurzer zeit schon luft durch den ball valve ?iss das bei dir nich ? :D

[pyronathanpyro]

@Gamesagent get yourself a decent fire ext tank and u can pump it up to like 400 plus psi the fore exting tanks are trhiker than a standard co2/air tank on a paintball gun so you could pump it pretty high i used a shop compressor wich goes to the regions of 6000 plus psi its used to power hydralic rams and such but i use it to fill tanks up and ive have a large fire extingishure hold 3000 psi just do be carefull to avoid liquid acumulation wich will cause internel rust and thin the tank out

[fullofhell]

@ak74u2

Mate, PSI is not a unit of speed, its a unit of pressure. It stands for Pounds Per Square Inch. I think you are thinking of FPS, which is feet per second. Although alot of guns have a muzzle velocity of more than 3000 FPS

[jdavidtruby]

sehr gut, try useing a nail with a cone on the back end made from the tip of a tube of caulk, it should look like this >--- this may increase your accuracy and penetration...... don't forget to sharpen the nail. entshuldegung bitte, mine deutch ist nicht sehr gut. viel spatts

[AirGunChannel]

Knall es nieder das Englischbuch :D

Das hat mir ein Jahr meines Lebens genommen...... Bei mir gehts durch 2 von den Biobüchern durch (die dicken 5-7Klassdinger)

Grüße aus Mainz

[guykr10]

@Crash29930 i

[GTown8082]

hey servus, sag mal wie hastn die siggflasche angeflanscht?

[marko03033]

Where did you get that metal airtank?

[markuscoollife]

you used glue or seal tape ?