Mixed GEET-PLASMA on genset

I just completed a test on running 2K gasoline genset step by-step with original ignition and mixed GEET and plasma ignition. I hope everyone would enjoy it.

Category:

Howto & Style

Tags:

• plasma
• ignition
• water
• spark
• plug
• geet
• swa-plasma
• vexus

[revizal]

Can't wait to see..

[revizal]

I just introduce water into the engine. I used water in the fuel tank and gasoline supply from a bubbler. With GEET+plasma booster I have no significant change (I have only RPM increasement). It's only worked in high RPM. When I open the valve to about 50% open (high water rate), the RPM goes down. It may give information that my GEET+ plasma are not enough to ignite water to get engine runs on water only.

[revizal]

I'm trying to find the best way to vaporize water to intriduce on this engine.

[revizal]

It may not enough to make a conclution about fuel consumption even I have some saving fuel on plasma+GEET. The effect (disabling smoke on exhaust) is the progress to prove increasing efficiency of combustion. With this methode we could clear convert a gasoline engine to diesel convinced.

[zak201]

how kV is to secure the diode, and the extent to A?

[bearboneskentuck]

Try an additional small engine carburator for the water only. Im not sure but this may mean you need to have either a double reactor or tie the new carb into the exixting reactor. Phil

[CowboyRX]

Excellent work. I tried to run plasma spark on my Honda 5HP gasoline 4-stroke stock (without GEET). But it kept backfiring. Are you removing the waste spark or changing timing on yours?

Does the plasma only work with 4stroke with waste spark, when GEET is enabled?

Thanks

[kazuza9]

hi, to get dry vapor into your system i suggest you have a separate bubbler full of water and have hot air going into the bubbler and then run it into your geet reactor..

[aluka1603]

Great work! i`am working on the same generator ,i get more efficiency thru heat equilibrium what are your temperatures on the generator?

[dreamyear]

my work is also most finished...i'll show you what water powered engine looks like.

[honda4004]

hi would you try immulsifying the water into a fuel source (mixing) and also try microwave water this way as it will be polarised i think.also am told that if you steam microwaved water up through a copper and bronze wool filled tube and re condensate it you will get heavy water. just some ideas

[crippled82]

Maybe with microwave resonance, as can be done with water to produce cold steam.