How to Repack Grease & Adjust Wheel Bearing in Cars : How to Reinstall Rotor & Outboard Bearing

Learn how to reinstall the rotor and outboard bearing on a car with expert automotive tips in this free online auto repair and car maintenance video clip.

Expert: Nathan McCullough
Bio: Nathan McCullough graduated from Nashville Auto-Diesel College with a GPA of 3.5 and received their Craftsmanship Award and Honor Seal.
Filmmaker: Robert Rogers

Category:

Autos & Vehicles

Tags:

• repairing car tips
• repacking car grease
• wheel bearing tips
• adjusting car bearings
• adjusting car tips
• auto tips
• car tips

[johnnydo333]

Tried to order videos: ‪1:Tools Needed‬ 10:‪Place‬ ‪Floor Jack‬ 5:‪Place Jack Stand‬ 20:Loosen Lug Nuts 13:‪Remove Tires‬ 18:‪Remove Brake‬ Calipers 4:‪Remove Wheel Bearing Cap‬ 6:‪Remove Cotter Pin‬ 16:‪Remove Wheel Bearings‬ 8:‪Clean Spindle‬ & Rotor 14:Clean‪ Wheel Bearings‬ 7:‪Grease to Bearings‬ 9:‪Seat Inboard Bearings‬ 19:‪Reinstall Rotor‬ 17:‪Adjust Wheel Bearing Nut‬ 12:‪Reinstall the Caliper‬ 11:‪Clean Rotor‬ 21:Remount Tires 3:‪Tighten Lug Nuts‬ 2:‪Torque Lug Nuts‬ 15:‪Pump Brakes‬

[H4v0kksh0tgunMan]

would of loved it if he has numbered his videos. Good job anyways your helping alot of people save money during these trouble times. anyways later.

[mwdgrimmztune]

when you tighten the castle nut down, tighten it all the way down as mush as you can with ONE hand, then back it off 1/4 of a turn to properly seat the bearing then replace the cotter pin...prefreably a new cotter pin

[scott21992]

he did that in one of the other videos..

[99minerkc]

Remember to put a thin coat of clean grease on the spindle before sliding the rotor into place!