Hydrostatic Test | Pipe End Plugs | E-PEP™

STATS patented Pipe End Plugs are used primarily in construction and fabrication of the oil, gas and petrochemical industries to cap open ended pipe, pipe spools or piping systems facilitating hydrostatic leak and strength tests.

STATS E-PEPs™ are fitted to the pipe end and hydraulically actuated, gripping the pipe externally. The introduction of hydraulic set pressure activates a mechanical lock assembly that grips the OD of the pipe whilst simultaneously energising an elastomeric seal in the ID. This allows the pipework to be pressure tested with minimum preparation to the pipe end and no remedial work after removal. A through port allows the system to be filled and pressurised or vented through the E-PEP™. To remove the E-PEP™ from the pipe end, hydraulic pressure is applied to the unset circuit, retracting the lock assembly and de-energising the seal.

Category:

Science & Technology

Tags:

• STATS Group
• Pipeline Isolation
• Integrity
• Testing
• Connection
• Repair
• Maintenance
• isolation plug
• isolation tool
• isolation
• pipework isolation
• pressure isolation
• pressure testing
• piping test
• weld test
• test tool
• hydrotest
• connector
• coupling
• weldless connection
• repair clamp
• structural clamp
• pressure containment
• clamp
• piping inspection
• intervention
• process & pipeline repair
• hot tap
• Pipeline
• Pipework
• Oil
• Gas