You only filled the foam but the reservoir is that little empty space at the other end.
If you look from the side on the end where the chip is you will see a little protrusion into the cartridge . Get a small , sharp screw and screw into it above there and you will go into the original sealing plastic ball and can pull that out. .
Hold your finger over the bottom of the cartrige where the ink comes out and refil. Put ball back in and your good and full.
You just covered the air hole without air going into the cartridge no ink will come out - Drill the other end!!!
elvis459 2 months ago
You drilled the wrong end!!
You only filled the foam but the reservoir is that little empty space at the other end.
If you look from the side on the end where the chip is you will see a little protrusion into the cartridge . Get a small , sharp screw and screw into it above there and you will go into the original sealing plastic ball and can pull that out. .
Hold your finger over the bottom of the cartrige where the ink comes out and refil. Put ball back in and your good and full.
DarePhotography1 7 months ago
Thank you for this video.
chonesong 9 months ago
have you got enough there lol
joodmcg 1 year ago 2
great video
Jokeapp 1 year ago
great voice!!!!!! have your balls dropped yet?
dm4230 1 year ago
I like him
helstontvx 1 year ago
wouldnt the shavings from the plastic get mixed in to the ink and maybe mess it up?
ragingelephants2005 2 years ago
heeey can I use coolaid flavors in my cartridge like grape,orange, and raspberry ,I dont have any ink
maxestuardo 2 years ago