American DJ X-Move Laser

Perfect for small clubs or the entertainer on the go! Test your creative skills with a DMX Controller (sold separately) with 5 DMX Channels and adjust the laser patterns. Or, just turn it on and let it run in sound active mode though its exciting built-in programs. Link multiple units using DMX

Specifications:
• Compact 4.9mW DMX-512 green laser moving head
• 5 DMX Channels = Control Pan, Tilt, Pattern, Laser On/Off, Manual Pattern Effect
• 540° pan / 220° tilt
• Shutter: Pulse effect; random strobe slow to fast
• Dimming: 0% - 100%
• 4-Button LED menu system making it easy to navigate
• 13-degree beam angle
• Manual Focus
• Linkable via 3-pin XLR connectors
• Stepper motors with micro stepping
• Perfect for small clubs or the entertainer on the go
• 3 operation modes: DMX, Sound Active & Master Slave
• 1/4 input for optional remote control (sold separately)
• Laser diode: 4.9mW (Class IIIa laser)
• Multi-voltage switch: (115V/60Hz or 230V/60Hz) - IEC socket
• Dimensions (LxWxH): 8 x 7.5 x 11.25 / 205 x 190 x 285 mm
• Weight: 10 lbs. / 4.5 kgs.

Category:

Howto & Style

Tags:

• American
• DJ
• Move
• Laser
• Green
• Moving
• Head
• DMX
• Strobe
• Dimming
• Focus
• Entertainer
• Nightclub

[MCDJK]

Great effect. Is this mountable using a standard Light truss?

[adjlighting]

It comes with a mounting plate that allows you to add a clamp so it can be mounted to truss.

[gmsbandmember]

Hi there,

In this video, The unit never shows the complete inventory or patterns this fixture can do. Could you all do a follow up vid showing each pattern?

Thnx

[ledlight2]

kan u make a wave kind of shape ??

[MCDJK]

Thanks for the feedback.

I have recently purchased about a dosen "O" clamos, but I have never noticed any safety cables being offered at any of the DJ outlets I shop at.

Do you know where I can get some? Or should I go to a hardware store and make my own? I actually carry a roll of 18 or 16 gauge solid wire, but you can only use it once or twice before it breaks off like a cheap coat hanger.

[ccshuff]

When mounting it make sure to use O clamps and safety cable it up there. They are really cheep to get and i use them on all my lights. I had a 23lb scanner fall off the truss somehow and the cable saved it

[ledlight2]

it is easy to make the effect but it is a lot harder when u want a moving head :P