minnkota i-pilot Advanced AutoPilot Malfunction
Uploader Comments (phil0021007)
All Comments (14)
-
My guess it is install! I have no issue use 6 gauge awg marine tinned wire for starters,50amp manual circuit breaker, nice connections!
-
@Chrissers2010 I had the same thing happen to me. I think it's because it lost it's GPS signal. I had to unplug the power and replug it back in. After that, it was fine again.
-
Product is normal behavior and had a sudden strange behavior, such as video and cable connections are a problem, I'm not wrong, or the placement of course, we found no change in symptoms've tried several times, perhaps a GPS module out to wonder if the problem is Ten thousand .... How to reset the statement gave the same thing will do, two separate
-
In operation, disconnect and reconnect any wires that are you talking about? Please explain it in detail on the pilot children can disassemble and re-assemble the symptoms not the same thing to assemble and disassemble've reset puts the other way, you're talking about ... If so, I'd appreciate how bad children because the pilot's head is hurting ...
-
@phil0021007 Just stow it and deploy again or unplug it and plug it back in again.
This solved the problem for me every time.
I have heard this problem is caused by low voltage to the unit. Could be due to wire sizing, or various other issues.
Chrissers2010 11 months ago
@Chrissers2010
Can you see the same symptoms on land taeseuteu other external issues are not the only one there's a good peculiar because of the low voltage and the other uses 100A Delco battery've also tested for
phil0021007 11 months ago
OK, I'll try to make it simple as it gets :)
Option 1:
Take it out of the water (stow) and put it back in the water ( deploy)
Option 2 :
Unplug it from the power supply (battery) and then connect it again
Option 1 or 2 will do the same thing it will reboot the electronics and your iPilot will work again.
lifeisfuneh 1 year ago
Sorry, I do not understand the interpretation I'm clumsy at Home
Put a single water that reinstalling does mean to say? Are you saying put the water motor garage? Motor in water or other liquids that contain the same thing Does not she have? Two water motors have failed Why should I put the door ... Connect the battery, and two single motor quit and then re-named the jalan to understand what's normal,
phil0021007 1 year ago
even by unplugging the power to put it does reset to? 1 and 2 can be reset with just one kind of beonjunge hasyeotneunde ... Both methods make sense Oh, as I think
phil0021007 1 year ago