MACHINE SHOP TIPS #64 Clausing Lathe Gibs Pt 2 tubalcain
Loading...
Uploader Comments (mrpete222)
All Comments (34)
-
The story about the hex / allen set was great. I don't know what's come over pete these last few videos. First he's got cocaine on the brain, then the EPA.... it's all that brake cleaner!
Search for a video titled "Scraping in a lathe's top slide (with tapered gib)". The guy has 38 videos so far, but they're all related to casting and machinery. He shows the scraping process for ways. I first learnt about the idea from Gingery's book 'Build a metal lathe', I'm sure some of you have that book!
-
I had a chance to meet the inventor of the Bondhus wrenches up here in Minneapolis, he never patented the design and still made money on the product.
-
Have you ever used a polishing/lapping compound to "wear-in" a dovetail to take out the tight spots? I've done it on a few dovetails, seems they bind toward the outboard travel where one does not use them very often or where they get nicked up. I've also had to lap in some taper attachments in areas where they don't get worn-in by use. After lapping, I clean the parts up thoroughly. I use valve lapping compound, fine grade, oil base, available at any auto parts store.
-
i'm a noobie i like watching ya vids pete
-
you have the most annoying voice ever! i muted it at 00:04
-
I love the Boundhous brand. The BLX12 set is nice.
-
You should ask Santa to bring you a bench top parts washer. Merry Christmas to you and your family. Thank You for sharing your knowledge with all of us.
-
wow, you are a genious
-
I sure enjoy these videos. I appreciate your time.
10:45
MACHINE SHOP TIPS #63 Clausing Lathe Gibs Pt 1 tubalcainby mrpete2223,761 views- 6:12
MACHINE SHOP TIPS #58 Bridgeport Mill DRO part 2 tubalcainby mrpete2225,954 views
- 1:04
Melting Aluminum Wire with Waterby MrSciencetificsasuke2,383 views
- 8:14
MACHINE SHOP TIPS #35 Part 1 Parting on the Lathe tubalcainby mrpete22223,461 views
- 1:26
Single Point Cutting Tool Geometryby etprof55,643 views
- 8:10
MACHINE SHOP TIPS #15 Bridgeport Mill TRAMMING with SPINDLE SQUARE tubalcainby mrpete22217,340 views
- 6:15
Notchmaster by JD Squared, Inc.by JaimeeJD229,466 views
- 6:38
INDEX OF tubalcain MACHINE SHOP VIDEOS nov 2011by mrpete2225,445 views
- 7:47
MACHINE SHOP TIPS #48 Lathe Project BEARING Pt 3 tubalcainby mrpete22215,829 views
- 0:59
13" Clausing Lathe With Tools For Sale - Cabin Fever Auctionsby CabinFeverExpo4,789 views
- 9:52
MACHINE SHOP TIPS #18 Musing on Lathe Threading tubalcainby mrpete22221,792 views
- 7:39
MACHINE SHOP TIPS #36 Part 2 Parting on the Lathe tubalcainby mrpete22215,204 views
- 10:46
MACHINE SHOP TIPS #24 Acme Threading Part 1 tubalcainby mrpete22221,035 views
- 11:25
MACHINE SHOP TIPS #51 Lathe Project Plumb Bob Pt 3 of 3 tubalcainby mrpete2227,496 views
- 13:35
MACHINE SHOP TIPS #66 Lathe Project Pulley Part 2 of 3 tubalcainby mrpete2226,703 views
- 9:09
MACHINE SHOP TIPS #57 Bridgeport Mill DRO part 1 tubalcainby mrpete2226,368 views
- 9:48
MACHINE SHOP TIPS #26 Transferring Holes Part 1 tubalcainby mrpete22217,212 views
- 7:59
MACHINE SHOP TIPS #30 Facing on the Atlas Lathe Part 1 tubalcainby mrpete22210,040 views
- 11:45
MACHINE SHOP TIPS #28 Hardinge Dividing Head Part 1 tubalcainby mrpete22219,283 views
- 8:13
MACHINE SHOP TIPS #20 Sine Bar (with SPINDLE SQUARE) part 2 tubalcainby mrpete22217,638 views
Yes--I used to paint everything rustoleum navy gray when I was young. Good idea on the oiler, and I need to replace the ball oiler on top of the brass crossfeed nut.
mrpete222 2 months ago