MetroListeroidFirstRealStart.wmv
Loading...
Loading...
1,275
Loading...
0:34
ListeroidFirstStartThenQuits.AVIby jedon13846 views- 1:06
JKSON 8/1 diesel engine stopping.by bendy20003,961 views
- 0:32
16/1 Metro Listeroid first start.by carbogger2,230 views
- 1:16
Metro Lister CS 6/1 Listeroid running with radiator and generator head.by jedon132,847 views
- 1:03
Lister type Engine - Test runby gosub2832,197 views
- 1:12
Metro Listeroid 2nd Run With 5kw Generatorby danljohnston3,182 views
- 0:54
JKSON 8/1 diesel engine again.by bendy20002,307 views
- 0:45
Metro Listeroid Engine First Runby danljohnston1,956 views
- 1:00
Listeroid First Start 020411by tscotty2345867 views
- 1:24
VEGETABLE OIL FUEL LISTER ENGINE LISTEROIDby billperry11218,293 views
- 1:04
The Revealby Kurpav1,255 views
- 3:38
Listeroid CS 8/1 uncrating and inspection #2by mattnbin16,771 views
- 0:53
Listeroid Metro 6/1 Murphy Auto Shutdown Systemby rocketboy9111,644 views
- 2:15
6/1 Listeroid Natural Gas / Dieselby hotrod37378,978 views
- 0:29
Listeroid power stationby rocketboy91118,042 views
- 1:15
Listeroid 6/1by chrispyboy638,306 views
- 0:36
Listeroid Startupby MrGerryButler697 views
- 3:00
Lister engine air startby hotrod373739,937 views
- 0:38
LISTER CS 6/1by swleesr3,197 views
Hi there,
Very nice Listeroid, looks and sounds great!
But I would like to just warn you about starting fluid. If you use more than what you did in a diesel it will need it to start every time. This is due to it increasing the compression and it actualy bends the connecting rod very very slightly. It will also destroy your rings so be carefull.
Otherwise, great running engine.
All the best,
Phill.
steamwally 2 years ago
Phill,
Thanks! I have it hooked up better now, see my more recent videos. I don't need starting fluid to get it going, I was pretty paranoid and used the minimum possible fluid to start it, seemed like whenever I moved it then it was hard to start, oil got somewhere it shouldn't be? Starts fine on it's own now though. See the hoses there to flood the water jacket? I had the pressure up to high and blew the seals out on the water pump ( didn't find that out until the bearing seized ).
jedon13 2 years ago
Thanks,
Glad you were carefull with the fluid, these are great engines. Have the bearings been repaired now, water pump falier is a horrid thing to happen.
Good luck with the engine : )
steamwally 2 years ago
I replaced the bearing but I guess the seals are still bad since it leaks after it runs for around 6 hours. I'm going to get an electric pump like a taco or grundflos.
jedon13 2 years ago