Mini mill Problem
Loading...
Loading...
2:31
roughing cut on a mini millby causticblood689 views- 2:23
Milling and Squaring up a part using the Milling Machineby dukestudentshop6,282 views
- 2:31
My HiTorque CNC millby 8bithack1,074 views
- 1:49
lining up the y axis on my mini millby causticblood211 views
- 4:54
CNC Desktop Mini Mill with Fluid control cutting 3/8" steelby MidwestMachineWorks1,275 views
- 7:16
Home made mill cutting sheet steel.by LeewayMan17,339 views
- 3:04
Crash Course in Milling: Chapter 5 - Work Locating, by Glacern Machine Toolsby GlacernMachineTools59,625 views
- 1:07
Spindle wobble.by Bisonknives66 views
- 3:21
How To Use an Edge Finderby TheToolandDieGuy1,131 views
- 2:46
how to use an edge finderby causticblood544 views
- 2:09
My First CNC projectby randyrw1,019 views
- 2:34
Hobbing (Gear cutting) on a Mini-Mill with EMC2by blyndpew36,554 views
- 0:48
How to Use a Fly Cutter with the Micro-Mark MicroLux Mini Milling Machineby micromarktools124,692 views
- 8:15
CNC Mini Mill Conversionby gomiddlemas1,453 views
- 9:12
Little Machine Shop HiTorque Mini Mill Unboxingby chartbundle11,952 views
- 4:55
mini mill X2 - how i mounted the mill - draw bar hammer i built.by NPC945502,138 views
- 13:43
Grizzly G0704 BF20 Highspeed Bearing break-inby diyengineer3,007 views
- 0:39
JET MILL DRILL JMD-18by jvhscooter3,401 views
- 6:17
Thankyouby Bisonknives100 views
- 1:26
Single Point Cutting Tool Geometryby etprof55,643 views
Make sure you wind the spindle all the way down to the end of it's travel lock it in place then give the draw bar a good smack with a brass or soft type of mallet after you have loosened the dray bar nut 2turns
I use a metal hammer with aluminium block.
Good luck
albjames 4 months ago
I have the exact same mill and the only thing I use the chuck for is drilling. They are not made to do anything else. Besides drill bits every other tool I have is for the MT3. I have had to use a metal hammer once or twice on my drawbar to get collet out. Loosen it up 2 threads and give it a good whack and only go a little beyond hand tight next time.
banshee8989 5 months ago