Blade 400 3D What is wrong here?
Loading...
Loading...
16,538
Loading...
4:31
HIT BY RC HELIby crgonzalez0853,700 views- 2:45
BLADE 400 3D Second outside flight learning to fly/crashby Jeffryweldontube5,860 views
- 1:00
Blade 400 Crash - SHORTby mikepmurf24,545 views
- 0:48
eflite blade 400 vibration plz helpby GamesBeforLife2,298 views
- 1:12
Paul's first Blade 400 flight with no training gear!by craig300838,964 views
- 0:44
Blade 400 trouble shooting 2of3by contact20013,771 views
- 6:18
Learning to fly the Blade 400by thebrunssens5,359 views
- 6:35
blade 400 3d Coordinated Turnsby sokal1122,414 views
- 9:48
HeliMix Main Shaft Repair Part 2 of 3by HeliMix10,908 views
- 9:46
HeliMix Feathering Shaft Repair 2 of 3.mpgby HeliMix12,312 views
- 6:59
Blade 400 Trex Aluminum Head Conversionby evildomain10,333 views
- 2:28
Blade 400 vibrationby r6yamahar16,462 views
- 5:56
Blade 400 practicing the basicsby captksmh7,567 views
- 1:17
Blade 400 exploding (Blade Let Go) CRASHby billiebumblebee125,711 views
- 6:53
Replacing broken feathering shaft on E-Razor 450 RC Helicopterby Strikeslip2,442 views
- 1:07
Blade 400 Strange Vibesby rotarydoc1,417 views
- 6:13
Blade 400 blade strikeby thebrunssens2,907 views
- 6:07
BLADE 400 3D head setup part 3by sokal1133,490 views
- 1:47
Blade 400 tail spinby mrbenno723,050 views
It looks like the blades are off balance. try putting a piece of dark tape on the front of one blade, get eye level with the blades as they spin, if you see that one blade is higher or lower than the other, than you need to adjust the Linkage Rod/ Push-Rod. that should stop the vibes.
a7ulrich 2 months ago
could be a lot of things. bent shaft, blades backwards, chipped blades, too tight/loose blade grips, too much pitch
BrettLovesLlama 7 months ago
Jeffry, the heli is making so much air disturbance it disrupts the machine. Try a bigger room, or take it up higher. I have that problem with my e-flite CX
FireAce44 9 months ago
operator error
123450197 11 months ago
blades are backwards. u welcome.
raysaudia 1 year ago
looks like a bent main shaft, dont worry you can buy new ones
XxstryaexX1 1 year ago
it looks like the blades are not getting enough pitch. Did you balance the blades on the main rotor?
FullLifeRebel 1 year ago
@paddywagons104 no mate im not and u need the training skids for the first flight I RECOMMEND
huggy99huggy 1 year ago
did you crash before because if you crashed then the spindle might be bent and it will cause the heli to vibrate
ZzStev3NzZ 1 year ago
could be your main blades are to tight
thercpoop 1 year ago