2nd Run with Jackplate installed
Loading...
Uploader Comments (cpgixxer)
All Comments (18)
-
Raise the motor up until the spray stops. Mine sprayed Ike yours so I moved it up and when the spray was gone, I got an extra 3 mph..
-
I just uploaded a 15hp I rebuilt a few months ago without a jack plate and two in the boat for comparison.
-
What and where did you get parts for the Water Pump Indicator? Did you drill a hole or did you change the lower cowling? What year Ign Plate and CDI are you useing? looks like she is running well :)
-
oh well best get a new set of gauges thanks for the reply i did pick up a 40 evinrude has a intresting gear case ive never seen and a engine has evinrude everdone a gear case with fins around the propeler gear housing case not bolt on there a part of the casting like a dart with 1 fin removed ..thanks again
1:42
FishingUniversity JackplateTipby FishingUniversity2,336 views- 0:49
Jack Plate Movie 1by Skater300XS3,547 views
- 0:30
015 CMC Powered Jack Plate Outboard boat motorby plm94714,200 views
- 1:08
Bob's Jackplate gets you in/out of skinny waterby billfishbetty1,127 views
- 0:48
Increase Fuel Economy with Bob's Jack Plate!by billfishbetty7,651 views
- 2:09
Detwiler Jackplates - Information and Installationby MarineTechProducts5,184 views
- 1:05
14' Bug Buster High Tide 70+MPH fast duck hunting boatby SHANEK63231,622 views
- 10:01
Evinrude Johnson 9.9 15 Carb Serviceby cpgixxer10,149 views
- 3 videosMarine jack plate
- 1:10
12' with johnson 9.9 outboardby smoktire4,876 views
- 1:54
jackplate demoby LONRGR2,121 views
- 1:46
Jacked Up Jack Plates at work and play.by JACKEDUPJACKPLATE718 views
- 1:42
I need some help on how to remove the lower unit on my 1965 Evinrude 90hp Outboardby FrostyOldMan5,662 views
- 1:33
Bass Pro talks about Bob's Machine Shop Hydraulic Jack Plateby BobsMachine21,124 views
- 1:18
Mercury 25hp 4 stroke motor, long shaftby txd2dth18,506 views
- 2:12
Transducer Shield & Saver Installation video L BRACKET ON ATLAS JACK PLATEby TransducerTV4,052 views
- 1:11
Bob's Machine Shop Hydraulic Jack Plate FLWby BobsMachine15,959 views
- 1:53
Trophy Quest Sportscast - Jack Plates & Props - Q & Aby AMAZONDAVE32,380 views
- 0:53
Bob's Machine Shop Jack plate - Scott Martin Challangeby BobsMachine8,052 views
- 0:36
Porta Bracketby bluewateraddict1,965 views
raise that mor you will get 30...raise it till no more spray..
MovieMakerPro77 3 months ago
@MovieMakerPro77 Sold sold and sold! It's all gone.
cpgixxer 3 months ago
Did you have to remove the cover to tap for that tel-tail?
There is a small hole with threads on that cover at the top right.
Can I not drill a hole into that and thread some type of a fitting?
rickjm1001 7 months ago
@rickjm1001 I send you a message with the details.
cpgixxer 7 months ago
model number 203b02a 1973 i am told has the coils bolted to the head not under the fly wheel i all so have a 18 hp evin and a 4hp lightwin all have points ....
MrWill838 1 year ago
@MrWill838 They did not make a 20hp with CDI so the only way would be to elminate the points by going to a small engine shop and asking them for the kit to convert. I was lucky cause all the later model parts fit. A points motor if in good tune will run for many years without need to touch them, I just did it cause I could, I got the parts for nothing, I wouldn't have bothered if I had to shell out the money.
cpgixxer 1 year ago