AX84 October Amp with Rx1 removed
Loading...
Loading...
7,735
Loading...
3:50
AX84P1 Demo Dirtyby negrito855812,450 views- 3:02
Hi-Octane tube Guitar amp DIY (HIGH GAIN) AX84.comby DLOWSHIT12,080 views
- 1:34
Amplificador HandMade Hi-Octaneby fcruzhp25,347 views
- 5:12
AX84 High Octane Tube Ampby mkennes17,756 views
- 2:16
Hi-Octane Clip - Chris Hurleyby petruccizw30,890 views
- 2:00
AX84 October Demo Clip with G&L ASAT Bluesboyby fuj764,376 views
- 5:14
AX84 October Demo Clip with Les Paulby fuj765,147 views
- 2:39
1W Firefly amplifierby InfrequentPractice55,374 views
- 0:54
DIY Tube Amplifier using schematics from ax84. 12ax7 for pre amp and el34 for power.by sjexperience46,631 views
- 2:31
thiline+october dirtyby negrito85584,515 views
- 2:30
AX84 Single Ended Lead Tube Guitar Amplifier Projectby SamEarth6,396 views
- 9:06
P1 eXtremeby CutterRubio14,678 views
- 3:05
Hi Octane 1x10 Combo from AX84.com Kitby flea1324354,956 views
- 1:02
AMP AX84 - HO (3)by reveil6,934 views
- 1:37
AX84 Hi Octane - Ganho máximoby emaniox6,675 views
- 0:38
2W Trainwreck Express (AX84 4-4-0) demo, part 1by bancika2,563 views
- 0:48
hendrix little wing (intro) on AX84-P1 homemade tube ampby aLeSD210,866 views
- 2:42
AX84 P1 Strato sound.....by JoseBossio7,013 views
- 0:39
High Octane open chordsby johnstrato4,723 views
- 2:25
AX84 P1 amplificador de guitarraby ferminfer4,248 views
I had the same sound problem with my problem with my Renegade, but when I changed the power amp tubes and set the bias the problem stoped
slbuesso 3 years ago
I ultimately rewired much of my amp, removed the Rx1 and Rx2 resistors and never had a recurrence of the problem. The tubes I used were good (still using 'em) and also the bias was set correctly. As I mentioned before, I think I had a bad solder joint, but I'm not 100% sure of the cause.
davideotv 3 years ago
Any idea what causes that zapping sound? I just built my first guitar pedal (BYOC Octavia), and when I plugged it in it worked, but you can hear this faint zapping sound in the background.
codyt5 3 years ago
Bad solder joints. I also removed the Rx1 and Rx2 resistors which are superfluous it seems.
davideotv 3 years ago