Hyperion A123 Cell Assembly Video
Loading...
Loading...
78,485
Link to this comment:
Share to:
Loading...
- 8:32How to Build a Battery Packby W4WSW85,324 views
- 3:21How To Solder Connecters To Batteriesby AirAgeMedia136,136 views
- 1:01RCE -- How to tell the original A123 Systems ba...by 09360888624,909 views
- 11:37LiFePo4 A123 Systems, best rechargeable Battery...by electrodacus12,668 views
- 2:16ducktapingheadwaysby hal9000v212,551 views
- 1:10Lithium Polymer Battery Explosion 2by thomaspfeiferDotNet699,182 views
- 3:41BMS Demonstration: Part 1by utsvt6,092 views
- 8:23EBIKE 72v - Battery pack built from Dell laptop...by skeetab57804,074 views
- 6:50How to Solder, tips and tricksby filear9,498 views
- 7:39Making an 18650 Personal Vaporizer Box Mod Part...by steeljan13,701 views
- 1:4370000 watt electric go-kartby lamoureuxchenier695,784 views
- 1:31Battery Welding Considerationsby SunstoneEngineering62,240 views
- 3:44Remove dead cells from dead laptop battery packby blaineh98,117 views
- 0:40Lipo Battery Explosionby MrBlackJack0007210,708 views
- 4:41How to charge up to 4 Lithium batteries on One ...by tmenet30,376 views
- 3:37Team Think Tank receives A123 Batteries for VD6...by Toxictorch4,621 views
- 2:52Homemade Arc Welder 120v ACby kurtscottage24,968 views
- 2:39Lithiumakkus selber bauenby reinisflitzer53,167 views
- 3:38Lithium Ion charges in 20 seconds!by NightFlyyer63,001 views
@73amxman Yeah you can remove the plastic and then use a volt meter to check which cells are under the -2.2 volt?- threshold and charge just those cells with ac adapter putting out roughly 4 volts and 400 milliamps. You just need to get the voltage up on the weak cells and then pop it on the charger again. I brought all my dead packs back this way. I dont let them sit around almost dead anymore top them off at the end of the workday.
burlbark 6 months ago
that is really good assembly
SmoothlyLethal 7 months ago
Wow! That's very professional! Very well done! I don't think battery manufacturers will mind.
Altair8801 9 months ago
Hi I have 6 dewalt 36 volt batteries that have died. By that I mean there is something defective about them and they no longer will charge. Is there a way to check a cell to see which ones are bad. I would like to take apart the battery identify the bad cell or cells and replace it with good ones from another battery. Even if I only end up with 2 or 3 good batteries that would be fine for me. They run 160 a piece through lowes and home depot.
73amxman 10 months ago
Not recommended to solder on the terminals. It overheats the internals on the cell.
killacycle 1 year ago
very good video.thanks.
meyiyiyi55 1 year ago
My Channel
sandallssandalls 1 year ago
Look, everything in life is at your own risk and discretion. Intelligence must be applied. It's also dangerous to invest your life savings in the stockmarket but people still do it....If you don't understand something then simply look it up.
dmgcat 1 year ago
use plenty ventilation. don't breathe the fumes. stuff will kill you. classic human mistake
DanFrederiksen 1 year ago
nice were did u git he shrink wrap
43Wyattlong 2 years ago