Model Railroad VLog: Wiring: Part 1

My Web Site: http://modelrr.oakviewresources.com/
A funny thing happened on the way to doing a series on ballasting track. I realized I should probably run feeder wires from the track to the main bus before mucking things up with ballast(D'oh). This series on wiring this part of my model railroad is the result.

Category:

Howto & Style

Tags:

• Model
• railroad
• scale
• track
• wiring
• dcc
• arts
• crafts
• hobby
• yt:crop=16:9

[mk214]

Do you use insulated rail joiners in between the blocks when using DCC? I am about to start a layout of my own and am very new at the process. Thanks for your videos!

[thebige61]

@mk214 You'd only need insulted joiners if your layout has power districts.

E

[vp4d]

Idk about the US but in Australia, unless you are an electrician with capstone you cannot legally wire your home. If you do and u insure your home and it burns down or a major appliance dies ( no matter what actual cause) and they find out you wired it up, you wont get any money. This can be rectified quite easily by having an electrician look it over and sign off on your work.

[thebige61]

@vp4d Wiring a model railroad is a bit different than wiring a house. I had to get a permit to rewire my house. You don't need to get a permit to wire a model railroad (at last not here in the US).

[gillscreekman]

I'm not trying to give you a hard time when I ask this question. A lot of new model railroad persons don't know or understand some ot the termanology that you use. Things like a "Bus". What is a "Bus"? Is it the same thing that a "Cab" is? Please explain more for those like myself that don't know the first thing about what you are talking about. Thank you. Your modeling experience is fantastic by the way and your videos a very good quality. Keep the videos coming please!

[thebige61]

@gillscreekman Ok. Here's a couple of definitions for ya. Bus - an electrical conductor that makes a common connection between several circuits. So the bus provides power and the DCC signal to all the sections of track. The Cab is what is used to control the speed and direction of the train.

[Joseph12132m]

ok i just started out with trains so this might sound stupid, but i dont know how to wire in a light. it has two bare wires sticking out at the end of it

[ChrisWinterpants]

The layout is looking great. Thanks for the video!

[modeltrainteen95]

im using insulating points like the atlas ones

and the peco if u know the uk

mainly those peco ones

do u need insulating fishplates on em

or railjoiners

and lastly what gauge is good for a bus,

and how do u make the whole point live

[pyronathanpyro]

i use a 40watt soldering iron is this okay it seems to be good for my solder it makes nice joints in conections

[kutzbill]

@vp4d In the USA, most states can't stop a homeowner from a rewire of his own home. To be legal, you have to get a permit, (about $25.00 us) and you have to pass 2 inspections. The rough in and the finish. It's very hard to stop a single homeowner from doing his/her own work on their own house.

Check with local authorities, and get the permit.

[yuri5677]

do tracks from vendors like hornby need wiring?