Dr. Steven E. Jones Boston 911 Conference 12-15-07 Red chips
Top Comments
All Comments (43)
-
THE TRUE NORTH AMERICANS...DESERVE RESPECT... UNFORTUNATELY ARE REDUCED THE SAME CONDITION OF THE OTHER SUBJUGATED SOCIETY...
THEY ARE UNDER THE YOKE OF THE GLOBAL ELITE...COMPOSED BY ANOTHER PORTION OF NORTH AMERICAN POPULATION AND ALL CONTROL STATIONS IN NORTH AMERICAN SOCIETY ARE OCCUPIED BY
ELEMENTS THIS ELITE.
WHO WILL SAVE THE NORTH AMERICAN PEOPLE?
SUPER MAN??
-
@mrodway I'm pretty sure the Hindenburg was painted with something similar to thermite.
-
Google "paranoid delusion"
-
Google "Many Small Fission Nukes at the WTC"
-
The sideways burn is created by placing the thermite in a compact enclosement with a narrow opening, when it reacts, it shoots out of this opening.
--
I'm not saying that didn't happen, I'm just saying those things falling do not account for many of the reports where we not only have explosions and tremors, but also entire floors and everything in it being demolished. Neither do they cause temperatures of 4 to 5000°F or steel to evaporate, as reported by FEMA/NY Times, nor form microspheres.
-
...it is very likely that the counter-weights fell down their shafts. When several thousands of pounds of counter-weights fall down an elevator shaft and impact it would create an explosion like sound, along with tremors.
The Towers were constructed with large steel trusses. As the fire weakened the internal structure causing the steel trusses to weaken, along with all the related fasteners connecting everything together, it is likely that they failed. Steel failing sounds like an explosion.
-
If someone found a way to make aluminum and iron oxide powder burn sideways, I'd love to see it.
Explanations:
Each of the Towers had several high voltage electric transformers. When transformers fail or overload they make an explosion like sound. Each of the Towers also had several banks of elevators, each elevator requires a counter-weight. Unlike elevator cars, counter-weights are not usually equipped with safety brakes. So when the elevator cables failed for whatever reason...
-
That only depends on the way you applicate it. And we know there's atleast a patent that describes a way to apply it so that it works any which way you want.
Your explanations of the explosions are, imo, naïeve and don't explain what we see and what many witnesses heard. These 'explanations' are thrown around without evidence hoping they will stick. Just because you believe there's nothing sinister behind this, doesn't mean the least sinister explanation is the right one.
-
I doesn't cut as much as melt through what it's in contact with. That being said thermite is exceptionally prone to the gravitational forces making it very difficult to melt anything that isn't directly below it's chemical reaction.
Thermite doesn't go sideways, it goes down.
The "regular explosions" that occured have many explanations, none of them sinister or by explosive origins. See: electric transformer failure, elevator counter-weight drops, and steel truss stress fractures.
-
But it would be a good alternative to shape charges, because it cuts through steel quickly, and it is, compared to explosives, quiet. A pretty important factor if you want to ninja-demo the two biggest towers in the middle of New York.
So maybe they usually choose other solutions, but in this case, thermite could've been the best option. Though I'm convinced, as is obvious from all the video footage, that regular explosions did occur en masse during the collapse of the towers.
Educated guess: the gray side is aluminum. Jones showed that the red side is iron oxide. Together, they make thermite. We can speculate that it was manufactured in this double layer and then rolled up like toilet paper or stacked like tissues to make the device. The thermite devices were placed inside the hollow box columns to weaken them and make it look like fire was responsible for the collapse.
RichardC111165 3 years ago 7
They paint things with Thermate? sounds a bit dangerous to me.
mrodway 3 years ago 5