2011 NitroMad48 Update!!! Platinum Revo, Losi LST2, Baja 5B, Upcoming Cars, Gear, and Videos!
Loading...
2,991
Loading...
Uploader Comments (nitromad48)
see all
All Comments (57)
-
How fast does your revo run with the os 18
-
hey i have a tmaxx 4910 truck and i got a new engine. the savage 4.6 engine. would i need to upgrade my trannsmission with this upgrade?
-
More toutirials on the revo
-
Can you do more reviews, unboxings, tutorials, and something like ask squirrel.
Loading...
not that this has happened 2 me but wat would u hav 2 do about 2stroke engine (baja 5b) flooded engine
1698oscar 11 months ago
@1698oscar Same as a nitro, just pull the spark plug out, and tip it upside down, and pull the starter 2 or 3 times and put the spark plug back in.
nitromad48 11 months ago
@nitromad48 Do u have lots of problems with your revos clutch do u have an upgraded one or is it just stock and i nootice in the clutch bell they have metal sealed bearing and at my hobby shop he keeps giving me rubber sealed bearings and when i take of the clutch the rubber seals are missing and half the balls for the bearings does this happen to u i have the stock clutch system on a os 21tm and i dont know why its happening is the clutch overheating??? it happens every 1 or 2 tanks plz Help!!!
jccb487 4 months ago
@jccb487 I just have the stock one, except for my bearings. I dont use the rubber ones. But you shouldnt be having those problems, unless you dont have any play in the bell. That will cause it to blow.
nitromad48 3 months ago
@nitromad48 Then what bearings do u run in the revo the balls bearing just fall out when i open the clutch bell the ball bearings just fall out and the middle ring of the bearing just falls out it almost looks like the clutch and bearing OVER HEAT!!! and the guy at my hobby shop says not to drive on the grass do u drive on the grass what do u think about this???
jccb487 3 months ago
@jccb487 I run the RC Boca bearings. and not to run on grass is just dumb. I rip my trucks on grass all the time, if you have a properly set up clutch, and slipper, grass should even be remotely a problem. He would only be saying that because he doesnt know how to set up his clutch properly. Make sure you have minimum 1mm of play on the bell, grab the boca bearings, you can get them off their site, and be sure your slipper has a little slip but not much or else if will overheat.
nitromad48 3 months ago