Dillon 550B Up Close Reloading .357 Magnum
Loading...
Link to this comment:
Uploader Comments (Free2Reload)
All Comments (13)
-
@MrSmitty686 well is the casing buckling when you seat it or crimp it? they are two distinctly different dies
-
A little voice about this would be nice. I hate videos with no narration.
-
I have 650 and a 550. Like my 650 better than my 550. I have a few buddy that use lee, and when come over an I'm reloading they like to run my 650, it smoother, and they say its feel more solid than their lee.
-
HI ! I HAVE A QUESTION FOR YOU, YOU HAVE THE SAME DILLION AS I . MY QUESTION IS WHEN I SEAT THE BULLET MY CASE BUCKLES IN THE MIDDLE, IS THIS A CRIMPPING PROBLEM ? CAN YOU PLEASE HELP
-
try reloading 9mm bullet's in your 357 and 38 shell's next time then write me back with your performance level's. Im sure you will be impressed
-
I just got mine set up last Sat. I torqued the hell out of the priming tube nut and crushed a tip (my fault) ...won't do that again. Lucky for me there were 2 of each size. I'm very pleasantly surprised at the accuracy of the powder measure with bullseye. I am using lyman dies. I can't believe I single staged pistol rounds as long as I did.
-
Lee equipment is good too. But some people in life who can afford the best buy the best. If I had my choice I would take the Dillon hands down over Lee. Lee does make some nice hand loading tools. When I started handloading over 40 yrs ago. I used Lee product and they did a satisfactory job.
-
Allot faster than my little lee loader.
5:51Dillon 550b Introby bobmysterious3,338 views
- 2:28Loading 9mm on Dillon Precision XL650by MemphisMechanic62,644 views
- 2:33Handloading 2by hickok4550,045 views
- 0:54Reloading .357by 762gunr14,473 views
- 5:39Reloading Ammo (Dillon RL 550B Progressive Press)by AlabamaGunHands3,129 views
- 4:40Dillon 650 Powder Spillage Resolvedby loadmeister2,468 views
- 3:00Dillon 1050 and Kiss Bullet Feederby Diesolinedreams39,291 views
- 2:05Dillon 550by Ruud6618,658 views
- 9:11Reloading with the Dillon Square Deal Bby hickmanplace16,656 views
- 1:53Dillon 650 Reloading Basics part 1by mvpatriot38,615 views
- 9:56Lee Loadmaster loading 38 special / 357 Magnum ...by gavintoobe17,801 views
- 9:18Redding T-7 Loading 357 Magnumby gavintoobe20,541 views
- 5:34Hornady LNL AP Progressive Caliber Changeover 4...by gavintoobe10,601 views
- 3:10GSI Converting the XL650by MrMartyg100086,464 views
- 1:26Dillon xl650 full automatic by Maurizio Bocciaby forp6867,279 views
- 0:54Reloadingby im4ak210,981 views
- 0:33Lee Pro 1000 Reloading Press (10 rounds)by ArcherAce2107,817 views
- 0:31357 Magnum vs. Cinder Blockby Suupernintendo343,698 views
- 1:17357 Magnum barrel blows offby wavelength1970348,141 views
Yeah, it works, but there are too many handling operations. My second hand Lee Pro 1000 has a case collator that works every time feeding the case feed tubes. Which cost me $14. The only handling operation I have to do is sit a projectile in, pull the lever, and let the round fall in the bucket. I can also get 4 Pro 1000's, with dies, for 4 diferent cal, for the cost of 1 blue 550.
IK1963 3 years ago
Lee is great too! The use the Dillon for Rifle Reloading too. I guess I am one of those guys who likes stuff that cost a lot : ) Look at my other vids, you will see I am a Lee fan too. I better be, I sell Lee products : ).
Thanks for the post.
Free2Reload 3 years ago